/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2018-2020 Oplus. All rights reserved. */ #ifndef HX83112B_H #define HX83112B_H /*********PART1:Head files**********************/ #include #ifdef CONFIG_FB #include #include #endif #include "../himax_common.h" /*********PART2:Define Area**********************/ #define ENABLE_UNICODE 0x40 #define ENABLE_VEE 0x20 #define ENABLE_CIRCLE 0x08 #define ENABLE_SWIPE 0x02 #define ENABLE_DTAP 0x01 #define UNICODE_DETECT 0x0b #define VEE_DETECT 0x0a #define CIRCLE_DETECT 0x08 #define SWIPE_DETECT 0x07 #define DTAP_DETECT 0x03 #define RESET_TO_NORMAL_TIME 80 /*Sleep time after reset*/ #define SPURIOUS_FP_LIMIT 100 #define SPURIOUS_FP_RX_NUM 8 #define SPURIOUS_FP_TX_NUM 9 #define SPURIOUS_FP_BASE_DATA_RETRY 10 #define I2C_ERROR_MAX_TIME 5 #define EXTEND_EE_SHORT_RESET_DUR 60 #define EXTEND_EE_SHORT_INT_DUR 150 #define EXTEND_EE_SHORT_TX_ON_COUNT 146 #define EXTEND_EE_SHORT_RX_ON_COUNT 146 #define EXTEND_EE_SHORT_TEST_LIMIT_PART1 160 #define EXTEND_EE_SHORT_TEST_LIMIT_PART2 80 // ( unit = ratio ) /* tddi f54 test reporting - */ #define ELEC_OPEN_TEST_TX_ON_COUNT 2 #define ELEC_OPEN_TEST_RX_ON_COUNT 2 #define ELEC_OPEN_INT_DUR_ONE 15 #define ELEC_OPEN_INT_DUR_TWO 25 #define ELEC_OPEN_TEST_LIMIT_ONE 500 #define ELEC_OPEN_TEST_LIMIT_TWO 50 #define COMMAND_FORCE_UPDATE 4 //#define UPDATE_DISPLAY_CONFIG //Self Capacitance key test limite #define MENU_LOW_LIMITE 1630 #define MENU_HIGH_LIMITE 3803 #define BACK_LOW_LIMITE 3016 #define BACK_HIGH_LIMITE 7039 #define TEST_FAIL 1 #define TEST_PASS 0 #define LIMIT_DOZE_LOW 50 #define LIMIT_DOZE_HIGH 975 //gmq-himax /**COMMON USE ***START***/ unsigned long HX83112B_FW_VER_MAJ_FLASH_ADDR; unsigned long HX83112B_FW_VER_MIN_FLASH_ADDR; unsigned long HX83112B_CFG_VER_MAJ_FLASH_ADDR; unsigned long HX83112B_CFG_VER_MIN_FLASH_ADDR; unsigned long HX83112B_CID_VER_MAJ_FLASH_ADDR; unsigned long HX83112B_CID_VER_MIN_FLASH_ADDR; unsigned long HX83112B_FW_VER_MAJ_FLASH_LENG; unsigned long HX83112B_FW_VER_MIN_FLASH_LENG; unsigned long HX83112B_CFG_VER_MAJ_FLASH_LENG; unsigned long HX83112B_CFG_VER_MIN_FLASH_LENG; unsigned long HX83112B_CID_VER_MAJ_FLASH_LENG; unsigned long HX83112B_CID_VER_MIN_FLASH_LENG; unsigned long HX83112B_FW_CFG_VER_FLASH_ADDR; uint8_t HX83112B_PROC_SEND_FLAG; struct proc_dir_entry *hx83112b_proc_register_file = NULL; uint8_t hx83112b_byte_length = 0; uint8_t hx83112b_register_command[4]; bool hx83112b_cfg_flag = false; //#ifdef HX_ESD_RECOVERY u8 HX83112B_ESD_RESET_ACTIVATE; int hx83112b_EB_event_flag; int hx83112b_EC_event_flag; int hx83112b_ED_event_flag; //#endif bool HX83112B_RESET_STATE = false; unsigned char HX83112B_IC_TYPE = 11; unsigned char HX83112B_IC_CHECKSUM = 0; bool HX83112B_DSRAM_Flag = false; int hx83112b_diag_command = 0; uint8_t hx83112b_diag_coor[128];// = {0xFF}; int32_t hx83112b_diag_self[100] = {0}; int hx83112b_max_mutual = 0; int hx83112b_min_mutual = 255; int hx83112b_max_self = 0; int hx83112b_min_self = 255; int hx83112b_mutual_set_flag = 0; uint8_t hx83112b_cmd_set[8]; /**GESTURE_TRACK*/ static int hx83112b_gest_pt_cnt; static int hx83112b_gest_pt_x[10]; static int hx83112b_gest_pt_y[10]; #define HX_KEY_MAX_COUNT 4 #define DEFAULT_RETRY_CNT 3 #define HIMAX_REG_RETRY_TIMES 10 #define HX_83112A_SERIES_PWON 16 #define HX_83112B_SERIES_PWON 17 #define HX_TP_BIN_CHECKSUM_SW 1 #define HX_TP_BIN_CHECKSUM_HW 2 #define HX_TP_BIN_CHECKSUM_CRC 3 #define SHIFTBITS 5 #define FW_SIZE_64k 65536 #define FW_SIZE_128k 131072 #define NO_ERR 0 #define READY_TO_SERVE 1 #define WORK_OUT 2 #define I2C_FAIL -1 #define MEM_ALLOC_FAIL -2 #define CHECKSUM_FAIL -3 #define GESTURE_DETECT_FAIL -4 #define INPUT_REGISTER_FAIL -5 #define FW_NOT_READY -6 #define LENGTH_FAIL -7 #define OPEN_FILE_FAIL -8 #define ERR_WORK_OUT -10 #define HX_FINGER_ON 1 #define HX_FINGER_LEAVE 2 #define HX_REPORT_COORD 1 #define HX_REPORT_SMWP_EVENT 2 //gesture head information #define GEST_PTLG_ID_LEN (4) #define GEST_PTLG_HDR_LEN (4) #define GEST_PTLG_HDR_ID1 (0xCC) #define GEST_PTLG_HDR_ID2 (0x44) #define GEST_PT_MAX_NUM (128) #define BS_RAWDATANOISE 10 #define BS_OPENSHORT 0 #define SKIPRXNUM 31 /**COMMON USE*********END***/ /** FOR DEBUG USE*****START***/ typedef enum { DEBUG_DATA_BASELINE = 0x08, DEBUG_DATA_DELTA = 0x09, DEBUG_DATA_RAW = 0x0A, }HX83112B_DEBUG_DATA_TYPE; //self test use typedef enum { HIMAX_INSPECTION_OPEN, HIMAX_INSPECTION_MICRO_OPEN, HIMAX_INSPECTION_SHORT, HIMAX_INSPECTION_RAWDATA, HIMAX_INSPECTION_NOISE, HIMAX_INSPECTION_SORTING, HIMAX_INSPECTION_BACK_NORMAL, HIMAX_INSPECTION_DOZE_RAWDATA, HIMAX_INSPECTION_DOZE_NOISE, HIMAX_INSPECTION_LPWUG_RAWDATA, HIMAX_INSPECTION_LPWUG_NOISE, HIMAX_INSPECTION_LPWUG_IDLE_RAWDATA, HIMAX_INSPECTION_LPWUG_IDLE_NOISE, }HX83112B_THP_INSPECTION_ENUM; /* Error code of AFE Inspection */ enum HX83112B_RETURN_RESLUT { RET_OK, RET_ERR, }; typedef enum { SKIPTXNUM_START = 6, SKIPTXNUM_6 = SKIPTXNUM_START, SKIPTXNUM_7, SKIPTXNUM_8, SKIPTXNUM_9, SKIPTXNUM_END = SKIPTXNUM_9, }HX83112B_SKIPTXNUMINDEX; char* hx83112b_inspection_mode[]= { "HIMAX_INSPECTION_OPEN", "HIMAX_INSPECTION_MICRO_OPEN", "HIMAX_INSPECTION_SHORT", "HIMAX_INSPECTION_RAWDATA", "HIMAX_INSPECTION_NOISE", "HIMAX_INSPECTION_SORTING", "HIMAX_INSPECTION_BACK_NORMAL", "HIMAX_INSPECTION_LPWUG_RAWDATA", "HIMAX_INSPECTION_LPWUG_NOISE", "HIMAX_INSPECTION_DOZE_RAWDATA", "HIMAX_INSPECTION_DOZE_NOISE", "HIMAX_INSPECTION_LPWUG_IDLE_RAWDATA", "HIMAX_INSPECTION_LPWUG_IDLE_NOISE", }; /* Error code of AFE Inspection */ typedef enum { THP_AFE_INSPECT_OK = 0, /* OK */ THP_AFE_INSPECT_ESPI = (1 << 0), /* SPI communication error */ THP_AFE_INSPECT_ERAW = (1 << 1), /* Raw data error */ THP_AFE_INSPECT_ENOISE = (1 << 2), /* Noise error */ THP_AFE_INSPECT_EOPEN = (1 << 3), /* Sensor open error */ THP_AFE_INSPECT_EMOPEN = (1 << 4), /* Sensor micro open error */ THP_AFE_INSPECT_ESHORT = (1 << 5), /* Sensor short error */ THP_AFE_INSPECT_ERC = (1 << 6), /* Sensor RC error */ THP_AFE_INSPECT_EPIN = (1 << 7), /* Errors of TSVD!FTSHD!FTRCST!FTRCRQ and other PINs when Report Rate Switching between 60 Hz and 120 Hz */ THP_AFE_INSPECT_EOTHER = (1 << 8) /* All other errors */ } HX83112B_THP_AFE_INSPECT_ERR_ENUM; //Himax MP Limit #define RAWMIN 677 #define RAWMAX 13000 #define SHORTMIN 0 #define SHORTMAX 150 #define OPENMIN 20 #define OPENMAX 450 #define M_OPENMIN 0 #define M_OPENMAX 150 #define NOISEFRAME BS_RAWDATANOISE+1 #define NOISE_P 256 //gmqtest #define UNIFMAX 500 //Himax MP Password #define PWD_OPEN_START 0x77 #define PWD_OPEN_END 0x88 #define PWD_SHORT_START 0x11 #define PWD_SHORT_END 0x33 #define PWD_RAWDATA_START 0x00 #define PWD_RAWDATA_END 0x99 #define PWD_NOISE_START 0x00 #define PWD_NOISE_END 0x99 #define PWD_SORTING_START 0xAA #define PWD_SORTING_END 0xCC //Himax DataType #define DATA_OPEN 0x0B #define DATA_MICRO_OPEN 0x0C #define DATA_SHORT 0x0A #define DATA_RAWDATA 0x0A #define DATA_NOISE 0x0F #define DATA_BACK_NORMAL 0x00 #define DATA_LPWUG_RAWDATA 0x0C #define DATA_LPWUG_NOISE 0x0F #define DATA_DOZE_RAWDATA 0x0A #define DATA_DOZE_NOISE 0x0F #define DATA_LPWUG_IDLE_RAWDATA 0x0A #define DATA_LPWUG_IDLE_NOISE 0x0F //Himax Data Ready Password #define Data_PWD0 0xA5 #define Data_PWD1 0x5A static uint8_t NOISEMAX; #define BS_LPWUG 1 #define BS_DOZE 1 #define BS_LPWUG_dile 1 #define LPWUG_NOISE_MAX 9999 #define LPWUG_NOISE_MIN 0 #define LPWUG_RAWDATA_MAX 9999 #define LPWUG_RAWDATA_MIN 0 #define DOZE_NOISE_MAX 9999 #define DOZE_NOISE_MIN 0 #define DOZE_RAWDATA_MAX 9999 #define DOZE_RAWDATA_MIN 0 #define LPWUG_IDLE_NOISE_MAX 9999 #define LPWUG_IDLE_NOISE_MIN 0 #define LPWUG_IDLE_RAWDATA_MAX 9999 #define LPWUG_IDLE_RAWDATA_MIN 0 #define PWD_LPWUG_START 0x55 #define PWD_LPWUG_END 0x66 #define PWD_DOZE_START 0x22 #define PWD_DOZE_END 0x44 #define PWD_LPWUG_IDLE_START 0x50 #define PWD_LPWUG_IDLE_END 0x60 #define SKIP_NOTCH_START 5 #define SKIP_NOTCH_END 10 #define SKIP_DUMMY_START 23 //TX+SKIP_NOTCH_START #define SKIP_DUMMY_END 28 // TX+SKIP_NOTCH_END /** FOR DEBUG USE ****END****/ struct hx83112b_report_data { int touch_all_size; int raw_cnt_max; int raw_cnt_rmd; int touch_info_size; uint8_t finger_num; uint8_t finger_on; uint8_t *hx_coord_buf; uint8_t hx_state_info[2]; int event_size; uint8_t *hx_event_buf; int rawdata_size; uint8_t diag_cmd; uint8_t *hx_rawdata_buf; uint32_t *diag_mutual; uint8_t rawdata_frame_size; }; /*********PART3:Struct Area**********************/ struct chip_data_hx83112b { uint32_t *p_tp_fw; tp_dev tp_type; struct i2c_client *client; struct himax_proc_operations *syna_ops; /*hx83112b func provide to hx83112b common driver*/ struct hw_resource *hw_res; int16_t *spuri_fp_data; struct spurious_fp_touch *p_spuri_fp_touch; }; #endif