#include #include #include "kona-pmic-overlay.dtsi" #include "kona-sde-display.dtsi" #include "kona-audio-overlay.dtsi" #include "kona-thermal-overlay.dtsi" #include "kona-19805-sensor.dtsi" &qupv3_se12_2uart { status = "ok"; }; &pm8150a_amoled { status = "ok"; }; &qupv3_se6_4uart { status = "ok"; }; /* #ifdef OPLUS_ARCH_EXTENDS */ /* delete for audio pa &dai_mi2s2 { qcom,msm-mi2s-tx-lines = <1>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&tert_mi2s_sck_active &tert_mi2s_ws_active &tert_mi2s_sd0_active>; pinctrl-1 = <&tert_mi2s_sck_sleep &tert_mi2s_ws_sleep &tert_mi2s_sd0_sleep>; }; */ /* #endif OPLUS_ARCH_EXTENDS */ //#ifndef OPLUS_BUG_STABILITY /*&qupv3_se1_i2c { status = "ok"; qcom,clk-freq-out = <1000000>; #address-cells = <1>; #size-cells = <0>; nq@28 { compatible = "qcom,nq-nci"; reg = <0x28>; qcom,nq-irq = <&tlmm 111 0x00>; qcom,nq-ven = <&tlmm 6 0x00>; qcom,nq-firm = <&tlmm 110 0x00>; qcom,nq-clkreq = <&tlmm 7 0x00>; interrupt-parent = <&tlmm>; interrupts = <111 0>; interrupt-names = "nfc_irq"; pinctrl-names = "nfc_active", "nfc_suspend"; pinctrl-0 = <&nfc_int_active &nfc_enable_active &nfc_clk_req_active>; pinctrl-1 = <&nfc_int_suspend &nfc_enable_suspend &nfc_clk_req_suspend>; }; }; */ //#else /* OPLUS_BUG_STABILITY */ &qupv3_se1_i2c { status = "ok"; //#ifndef OPLUS_BUG_STABILITY //qcom,clk-freq-out = <1000000>; //#endif /* OPLUS_BUG_STABILITY */ #address-cells = <1>; #size-cells = <0>; nq@28 { compatible = "qcom,nq-nci"; reg = <0x28>; qcom,nq-irq = <&tlmm 111 0x00>; qcom,nq-ven = <&tlmm 83 0x00>; qcom,nq-firm = <&tlmm 110 0x00>; qcom,nq-clkreq = <&tlmm 7 0x00>; interrupt-parent = <&tlmm>; interrupts = <111 0>; interrupt-names = "nfc_irq"; pinctrl-names = "nfc_active", "nfc_suspend"; pinctrl-0 = <&nfc_int_active &nfc_enable_active &nfc_clk_req_active>; pinctrl-1 = <&nfc_int_suspend &nfc_enable_suspend &nfc_clk_req_suspend>; }; }; //#endif /* OPLUS_BUG_STABILITY */ &ufsphy_mem { compatible = "qcom,ufs-phy-qmp-v4"; vdda-phy-supply = <&pm8150_l5>; vdda-phy-always-on; vdda-pll-supply = <&pm8150_l9>; vdda-phy-max-microamp = <89900>; vdda-pll-max-microamp = <18800>; status = "ok"; }; &ufshc_mem { vdd-hba-supply = <&ufs_phy_gdsc>; vdd-hba-fixed-regulator; vcc-supply = <&pm8150_l17>; vcc-voltage-level = <2504000 2950000>; vcc-low-voltage-sup; vccq-supply = <&pm8150_l6>; vccq2-supply = <&pm8150_s4>; vcc-max-microamp = <800000>; vccq-max-microamp = <800000>; vccq2-max-microamp = <800000>; qcom,vddp-ref-clk-supply = <&pm8150_l6>; qcom,vddp-ref-clk-max-microamp = <100>; qcom,vccq-parent-supply = <&pm8150a_s8>; qcom,vccq-parent-max-microamp = <210000>; status = "ok"; }; &soc { //#ifdef OPLUS_FEATURE_CONNFCSOFT nfc_chipset { compatible = "oplus-nfc-chipset"; chipset-20828 = "SN100T"; chipset-19805 = "SN100T"; }; //#endif /* OPLUS_FEATURE_CONNFCSOFT */ gpio_keys { compatible = "gpio-keys"; label = "gpio-keys"; pinctrl-names = "default"; //#ifdef OPLUS_FEATURE_TP_BASIC pinctrl-0 = <&key_vol_up_default &key_vol_down_default>; //#endif vol_up { label = "volume_up"; gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>; linux,input-type = <1>; linux,code = ; gpio-key,wakeup; debounce-interval = <15>; linux,can-disable; }; //#ifdef OPLUS_FEATURE_TP_BASIC vol_down { label = "volume_down"; gpios = <&pm8150_gpios 7 GPIO_ACTIVE_LOW>; linux,input-type = <1>; linux,code = ; gpio-key,wakeup; debounce-interval = <15>; linux,can-disable; }; //#endif }; qcom,qbt_handler { compatible = "qcom,qbt-handler"; //#ifdef OPLUS_FEATURE_FINGERPRINT //qcom,ipc-gpio = <&tlmm 23 0>; //#endif /*OPLUS_FEATURE_FINGERPRINT*/ //#ifndef OPLUS_FEATURE_CHG_BASIC //pinctrl-names = "default"; //pinctrl-0 = <&key_home_default>; //qcom,finger-detect-gpio = <&pm8150_gpios 1 0>; /*#endif*/ }; //#ifdef OPLUS_FEATURE_FINGERPRINT oplus_fp_common { compatible = "oplus,fp_common"; oplus,fp_gpio_num = <1>; /* the gpio number of fingerprint id used */ oplus,fp_gpio_0 = <&tlmm 77 0x0>; pinctrl-names = "default"; pinctrl-0 = <&gpio_id2_default>; goodix_optical_G5 { oplus,fp-id = <1>; /* fp id mapping table */ vendor-chip = <11>; /* please refer to the struct fp_vendor_t in oplus_fp_commmon.n */ eng-menu = "-1,-1"; /* represents SNR, inclination test item in engineer menu, and 0/1 means off/on */ chip-name = "G_OPTICAL_19805_G6_7"; /* /proc/fp_id, will be displayed in engineer menu */ }; goodix_optical_G6 { oplus,fp-id = <0>; /* fp id mapping table */ vendor-chip = <11>; /* please refer to the struct fp_vendor_t in oplus_fp_commmon.n */ eng-menu = "-1,-1"; /* represents SNR, inclination test item in engineer menu, and 0/1 means off/on */ chip-name = "G_OPTICAL_19805_G6_3"; /* /proc/fp_id, will be displayed in engineer menu */ }; }; goodix_fp { status = "ok"; compatible = "goodix,goodix_fp"; interrupt-parent = <&tlmm>; interrupts = <23 0>; power-mode = <1> ; /*please refer to the struct fp_power_mode_t in oplus_fp_commmon.n ,0: power mode not set, 1: ldo power, 2: gpio power, 3: auto power */ ldo-supply = <&pm8150_l16>; ldo-config = <3300000 3300000 150000>; goodix,gpio_irq = <&tlmm 23 0x1>; goodix,gpio_reset = <&tlmm 68 0x0>; pinctrl-names = "default"; pinctrl-0 = <&gpio_goodix_irq_default>; //goodix,goodix_pwr = <&tlmm 125 0x0>; notify_tpinfo_flag = <1>; power-num = <1>; power_source_1 { power-mode = <1>; power-name = "ldo"; power-config = "ldo-config"; delay-time = <0>; }; }; //#endif /*OPLUS_FEATURE_FINGERPRINT*/ oplus_secure_common { compatible = "oplus,secure_common"; oplus,sec_reg_num = <0x7805E8>; oplus,sec_en_anti_reg = <0x7801F4>; oplus,sec_override1_reg = <0x7860C0>; oplus,override1_en_value = <0x1>; oplus,cryptokey_unsupport_status = <0x1>; }; //#ifdef OPLUS_FEATURE_TP_BASIC devinfo { compatible = "oplus-devinfo"; pinctrl-names = "active", "sleep"; pinctrl-0 = <&hw_id_active>; pinctrl-1 = <&hw_id_sleep>; io-channels= <&pm8150l_vadc ADC_GPIO1>; io-channel-names= "vph_pwr_voltage_sub"; main-sub { compatible = "hw-match, main-sub"; use_pmic_adc; adc_ranges = <0 80 81 180 181 300 301 420 421 550 551 650 651 760 761 850 851 950 951 1050 1051 1150 1151 1300>; aboard-patterns = <3 3 3 4 4 4 6>; /*main board*/ match-projects = <19063 19065 19361 19063 19065 19361 19065 19805>; /*rf type*/ rf_match_support; rf-patterns = <2 0 1 4 3 6 7>; }; device_0 { compatible = "hw, devices"; label = "distribution"; hw-id0 = <&pm8150_gpios 1 0>; hw-combs = <1 0>; hw-names = "Standard", "Pro"; }; }; //#ifdef OPLUS_FEATURE_TP_BASIC /*oplus_rf_cable { compatible = "oplus,rf_cable"; interrupt-parent = <&tlmm>; rf_cable_support_num = <1>; rf,cable0-gpio = <&tlmm 84 0>; rf,cable-support-timer = <0>; pinctrl-names = "rf_cable_active"; pinctrl-0 = <&rf_cable0_active>; };*/ //#endif /* OPLUS_FEATURE_TP_BASIC */ //#ifdef OPLUS_BUG_DEBUG oplus_sim_detect { compatible = "oplus, sim_detect"; Hw,sim_det = "modem_det"; }; //#endif /* OPLUS_BUG_DEBUG */ feedback_fb { compatible = "oplus,haptic-feedback"; }; }; /*&qupv3_se13_i2c { #address-cells = <1>; #size-cells = <0>; status = "ok"; qcom,i2c-touch-active = "st,fts"; st_fts@49 { compatible = "st,fts"; reg = <0x49>; interrupt-parent = <&tlmm>; interrupts = <39 0x2008>; vdd-supply = <&pm8150a_l1>; avdd-supply = <&pm8150_l13>; pinctrl-names = "pmx_ts_active", "pmx_ts_suspend"; pinctrl-0 = <&ts_active>; pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>; st,irq-gpio = <&tlmm 39 0x2008>; st,reset-gpio = <&tlmm 38 0x00>; st,regulator_dvdd = "vdd"; st,regulator_avdd = "avdd"; st,x-flip = <1>; st,y-flip = <1>; panel = <&dsi_sw43404_amoled_cmd &dsi_sw43404_amoled_video &dsi_sw43404_amoled_fhd_plus_cmd>; }; }; */ //#ifdef OPLUS_FEATURE_TP_BASIC &qupv3_se13_i2c { status = "okay"; synaptics_19805@4B { compatible = "synaptics-s3908"; reg = <0x4B>; chip-name = "S3908"; /* Interrupt && Irq-gpio */ interrupt-parent = <&tlmm>; interrupts = <39 0x2008>; /* Power Config */ vdd_2v8-supply = <&pm8150_l13>; vcc_1v8-supply = <&pm8150a_l1>; vdd_2v8_volt = <3008000>; /* Other HW Resource */ irq-gpio = <&tlmm 39 0x2008>; reset-gpio = <&tlmm 38 0x1>; pinctrl-names = "default"; pinctrl-0 = <&ts_int_active &ts_reset_active>; touchpanel,max-num-support = <10>; touchpanel,tx-rx-num = <16 36>; touchpanel,panel-coords = <1079 2399>; touchpanel,display-coords = <1079 2399>; touchpanel,touchmajor-limit = <0 54>; touchpanel,int-mode = <1>; /*0: interrupt and disable, 1:interrupt and not disable*/ project_id = <19805>; vid_len = <2>; tp_type = <8>; // type of tp_dev ,TP-SAMSUNG = 8; platform_support_project = <19805>; platform_support_project_dir = <19805>; platform_support_project_commandline = "default_commandline"; /* SW Support Feature Control */ black_gesture_support; black_gesture_indep_support; sportify_aod_gesture_support; fw_edge_limit_support; //kernel_grip_support; pressure_report_support; charger_pump_support; game_switch_support; smart_gesture_support; fw_update_app_support; fingerprint_underscreen_support; freq_hop_simulate_support; report_flow_unlock_support; screenoff_fingerprint_info_support; /* *Virtual Key Config: *1:touchpanel,button-type: *virtualkey_type: *Type 1: using board_properties *Type 2: using same IC (button zone&& touch zone are seprate) *Type 3: using diffrent IC (button zone&& touch zone are seprate) *Type 4: No need of virtual key process *supportted_button-map:select|menu|home|back * *2:touchpanel,button-map *type (X1,Y1)(X2,Y2)(X3,Y3)(Width_X,Hight_Y)--Only when button-type is 0 */ touchpanel,button-type = <4>; touchpanel.button-TRx = <0 0>; S3908 { report_rate_default = <90>; report_rate_game_value = <3>; fps_report_rate = <60 2 90 1 120 1>;//1:180Hz 2:120Hz 3:240Hz fingerprint_and_grip_param_equal_19805 = <1>; }; }; }; //#endif /*OPLUS_FEATURE_TP_BASIC*/ &vendor { bluetooth: bt_qca6390 { compatible = "qca,qca6390"; pinctrl-names = "default"; pinctrl-0 = <&bt_en_sleep>; qca,bt-reset-gpio = <&tlmm 21 0>; /* BT_EN */ qca,bt-sw-ctrl-gpio = <&tlmm 124 0>; /* SW_CTRL */ qca,bt-vdd-aon-supply = <&pm8150_s6>; qca,bt-vdd-dig-supply = <&pm8150_s6>; qca,bt-vdd-rfa1-supply = <&pm8150_s5>; qca,bt-vdd-rfa2-supply = <&pm8150a_s8>; //#ifdef OPLUS_FEATURE_FINGERPRINT //qca,bt-vdd-asd-supply = <&pm8150_l16>; //#endif /*OPLUS_FEATURE_FINGERPRINT*/ qca,bt-vdd-aon-voltage-level = <950000 950000>; qca,bt-vdd-dig-voltage-level = <950000 950000>; qca,bt-vdd-rfa1-voltage-level = <1900000 2040000>; qca,bt-vdd-rfa2-voltage-level = <1350000 1350000>; qca,bt-vdd-asd-voltage-level = <3024000 3304000>; qca,bt-vdd-asd-current-level = <10000>; }; kona_mtp_batterydata: qcom,battery-data { qcom,batt-id-range-pct = <15>; #include "fg-gen4-batterydata-alium-3600mah.dtsi" #include "fg-gen4-batterydata-ascent-3450mah.dtsi" }; extcon_usb1: extcon_usb1 { compatible = "linux,extcon-usb-gpio"; //#ifndef OPLUS_FEATURE_CHG_BASIC //vbus-gpio = <&pm8150_gpios 10 GPIO_ACTIVE_HIGH>; /*#endif*/ //id-gpio = <&tlmm 91 GPIO_ACTIVE_HIGH>; //#ifndef OPLUS_FEATURE_CHG_BASIC //vbus-out-gpio = <&pm8150_gpios 9 GPIO_ACTIVE_HIGH>; //pinctrl-names = "default"; //pinctrl-0 = <&usb2_vbus_det_default // &usb2_id_det_default // &usb2_vbus_boost_default>; /*#endif*/ }; }; &vreg_hap_boost { status = "ok"; }; &pm8150b_haptics { vdd-supply = <&vreg_hap_boost>; }; &pm8150b_vadc { #address-cells = <1>; #size-cells = <0>; vph_pwr@83 { reg = ; label = "vph_pwr"; qcom,pre-scaling = <1 3>; }; conn_therm@4f { reg = ; label = "conn_therm"; qcom,ratiometric; qcom,hw-settle-time = <200>; qcom,pre-scaling = <1 1>; }; skin_therm@4d { reg = ; label = "skin_therm"; qcom,ratiometric; qcom,hw-settle-time = <200>; qcom,pre-scaling = <1 1>; }; chg_sbux@99 { reg = ; label = "chg_sbux"; qcom,pre-scaling = <1 3>; }; mid_chg_div6@1e { reg = ; label = "chg_mid"; qcom,pre-scaling = <1 6>; }; usb_in_i_uv@7 { reg = ; label = "usb_in_i_uv"; qcom,pre-scaling = <1 1>; }; usb_in_v_div_16@8 { reg = ; label = "usb_in_v_div_16"; qcom,pre-scaling = <1 16>; }; usb_temp_adc { reg = ;/* 0x30*/ label = "usb_temp_adc"; qcom,ratiometric; qcom,hw-settle-time = <800>; qcom,pre-scaling = <1 1>; }; usb_supplementary_temp_adc { reg = ; label = "usb_supplementary_temp_adc"; qcom,hw-settle-time = <800>; qcom,ratiometric; qcom,pre-scaling = <1 1>; }; }; //#ifdef OPLUS_FEATURE_CHG_BASIC//Qingjun.Wang@BSP.Haptic,add 2020/03/17 for vib aw8697 &qupv3_se11_i2c { status = "ok"; /* AWINIC AW8697 Haptic */ aw8697_haptic@5A { compatible = "awinic,aw8697_haptic"; reg = <0x5A>; reset-gpio = <&tlmm 72 0>; irq-gpio = <&tlmm 11 0>; status = "ok"; qcom,device_id = <1815>;//20828 pinctrl-names = "default"; pinctrl-0 = <&aw_irq_gpio_default>; }; /* AWINIC AW8697 Haptic End */ }; //#endif &pm8150b_charger { status = "ok"; qcom,sec-charger-config = <1>; qcom,auto-recharge-soc = <98>; io-channels = <&pm8150b_vadc ADC_MID_CHG_DIV6>, <&pm8150b_vadc ADC_USB_IN_I>, <&pm8150b_vadc ADC_SBUx>, <&pm8150b_vadc ADC_VPH_PWR>, <&pm8150b_vadc ADC_CHG_TEMP>, <&pm8150b_vadc ADC_USB_IN_V_16>, <&pm8150b_vadc ADC_AMUX_THM4_PU1>, <&pm8150b_vadc ADC_GPIO4_PU1>; //#else //<&pm8150b_vadc ADC_CHG_TEMP>; //#endif io-channel-names = "mid_voltage", "usb_in_current", "sbux_res", "vph_voltage", "chg_temp", "usb_in_voltage", "usb_temp_adc", "usb_supplementary_temp_adc"; //#else //"chg_temp"; //#endif qcom,battery-data = <&kona_mtp_batterydata>; qcom,step-charging-enable; qcom,sw-jeita-enable; qcom,wd-bark-time-secs = <16>; qcom,suspend-input-on-debug-batt; qcom,fcc-stepping-enable; qcom,smb-internal-pull-kohm = <0>; }; &pm8150b_fg { //#ifndef OPLUS_FEATURE_CHG_BASIC // status = "ok"; //#else status = "disabled"; ///#endif qcom,battery-data = <&kona_mtp_batterydata>; qcom,hold-soc-while-full; qcom,linearize-soc; qcom,five-pin-battery; qcom,cl-wt-enable; qcom,soc-scale-mode-en; qcom,force-calib-level = <130>; /* ESR fast calibration */ qcom,fg-esr-timer-chg-fast = <0 7>; qcom,fg-esr-timer-dischg-fast = <0 7>; qcom,fg-esr-timer-chg-slow = <0 96>; qcom,fg-esr-timer-dischg-slow = <0 96>; qcom,fg-esr-cal-soc-thresh = <26 230>; qcom,fg-esr-cal-temp-thresh = <10 40>; }; &qupv3_se15_i2c { #address-cells = <1>; #size-cells = <0>; #include "smb1390.dtsi" halo,hl6111r@25 { compatible = "halo,hl6111r"; reg = <0x25>; status = "ok"; }; }; /* &smb1390 { pinctrl-names = "default"; pinctrl-0 = <&smb_stat_default>; status = "ok"; }; */ //#endif #if 0 &smb1390_charger { io-channels = <&pm8150b_vadc ADC_AMUX_THM2>; io-channel-names = "cp_die_temp"; qcom,parallel-output-mode = <2>; qcom,min-ilim-ua = <750000>; status = "ok"; }; &smb1390_slave { status = "ok"; }; &smb1390_slave_charger { status = "ok"; }; #endif &pm8150_vadc { #address-cells = <1>; #size-cells = <0>; vph_pwr@83 { reg = ; label = "vph_pwr"; qcom,pre-scaling = <1 3>; }; vcoin@85 { reg = ; label = "vcoin"; qcom,pre-scaling = <1 3>; }; xo_therm@4c { reg = ; label = "xo_therm"; qcom,ratiometric; qcom,hw-settle-time = <200>; qcom,pre-scaling = <1 1>; }; skin_therm@4d { reg = ; label = "skin_therm"; qcom,ratiometric; qcom,hw-settle-time = <200>; qcom,pre-scaling = <1 1>; }; pa_therm1@4e { reg = ; label = "pa_therm1"; qcom,ratiometric; qcom,hw-settle-time = <200>; qcom,pre-scaling = <1 1>; }; }; &pm8150l_vadc { #address-cells = <1>; #size-cells = <0>; vph_pwr@83 { reg = ; label = "vph_pwr"; qcom,pre-scaling = <1 3>; }; camera_flash_therm@4d { reg = ; label = "camera_flash_therm"; qcom,ratiometric; qcom,hw-settle-time = <200>; qcom,pre-scaling = <1 1>; }; skin_msm_therm@4e { reg = ; label = "skin_msm_therm"; qcom,ratiometric; qcom,hw-settle-time = <200>; qcom,pre-scaling = <1 1>; }; pa_therm2@4f { reg = ; label = "pa_therm2"; qcom,ratiometric; qcom,hw-settle-time = <200>; qcom,pre-scaling = <1 1>; }; }; &pm8150b_adc_tm { #address-cells = <1>; #size-cells = <0>; io-channels = <&pm8150b_vadc ADC_AMUX_THM3_PU2>, <&pm8150b_vadc ADC_AMUX_THM1_PU2>; conn_therm@4f { reg = ; qcom,ratiometric; qcom,hw-settle-time = <200>; }; skin_therm@4d { reg = ; qcom,ratiometric; qcom,hw-settle-time = <200>; }; }; &pm8150_adc_tm { #address-cells = <1>; #size-cells = <0>; io-channels = <&pm8150_vadc ADC_XO_THERM_PU2>, <&pm8150_vadc ADC_AMUX_THM1_PU2>, <&pm8150_vadc ADC_AMUX_THM2_PU2>; xo_therm@4c { reg = ; qcom,ratiometric; qcom,hw-settle-time = <200>; }; skin_therm@4d { reg = ; qcom,ratiometric; qcom,hw-settle-time = <200>; }; pa_therm1@4e { reg = ; qcom,ratiometric; qcom,hw-settle-time = <200>; }; }; &pm8150l_adc_tm { #address-cells = <1>; #size-cells = <0>; io-channels = <&pm8150l_vadc ADC_AMUX_THM1_PU2>, <&pm8150l_vadc ADC_AMUX_THM2_PU2>, <&pm8150l_vadc ADC_AMUX_THM3_PU2>; camera_flash_therm@4d { reg = ; qcom,ratiometric; qcom,hw-settle-time = <200>; }; skin_msm_therm@4e { reg = ; qcom,ratiometric; qcom,hw-settle-time = <200>; }; pa_therm2@4f { reg = ; qcom,ratiometric; qcom,hw-settle-time = <200>; }; }; &spmi_debug_bus { status = "ok"; }; &dsi_sw43404_amoled_cmd { qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; qcom,mdss-dsi-bl-min-level = <1>; qcom,mdss-dsi-bl-max-level = <1023>; qcom,mdss-brightness-max-level = <255>; qcom,platform-te-gpio = <&tlmm 66 0>; qcom,platform-reset-gpio = <&tlmm 75 0>; qcom,mdss-dsi-panel-test-pin = <&tlmm 46 0>; }; &dsi_sw43404_amoled_video { qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; qcom,mdss-dsi-bl-min-level = <1>; qcom,mdss-dsi-bl-max-level = <1023>; qcom,mdss-brightness-max-level = <255>; qcom,platform-reset-gpio = <&tlmm 75 0>; qcom,mdss-dsi-panel-test-pin = <&tlmm 46 0>; }; &dsi_sw43404_amoled_fhd_plus_cmd { qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; qcom,mdss-dsi-bl-min-level = <1>; qcom,mdss-dsi-bl-max-level = <1023>; qcom,mdss-brightness-max-level = <255>; qcom,platform-te-gpio = <&tlmm 66 0>; qcom,platform-reset-gpio = <&tlmm 75 0>; qcom,mdss-dsi-panel-test-pin = <&tlmm 46 0>; }; &dsi_sim_cmd { qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; qcom,platform-reset-gpio = <&tlmm 75 0>; }; &dsi_sim_vid { qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; qcom,platform-reset-gpio = <&tlmm 75 0>; }; &dsi_sim_dsc_375_cmd { qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; qcom,platform-reset-gpio = <&tlmm 75 0>; }; &dsi_sim_dsc_10b_cmd { qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; qcom,platform-reset-gpio = <&tlmm 75 0>; }; &dsi_dual_sim_cmd { qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; qcom,platform-reset-gpio = <&tlmm 75 0>; }; &dsi_dual_sim_vid { qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; qcom,platform-reset-gpio = <&tlmm 75 0>; }; &dsi_dual_sim_dsc_375_cmd { qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; qcom,platform-reset-gpio = <&tlmm 75 0>; }; &dsi_sim_sec_hd_cmd { qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; qcom,panel-sec-supply-entries = <&dsi_panel_pwr_supply>; qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; qcom,mdss-dsi-sec-bl-pmic-control-type = "bl_ctrl_dcs"; qcom,mdss-dsi-bl-min-level = <1>; qcom,mdss-dsi-bl-max-level = <1023>; qcom,platform-reset-gpio = <&tlmm 75 0>; qcom,platform-sec-reset-gpio = <&tlmm 128 0>; }; &sde_dsi { qcom,dsi-default-panel = <&dsi_oplus19065_samsung_1440_3168_dsc_cmd>; }; //#endif &thermal_zones { conn-therm-usr { polling-delay-passive = <0>; polling-delay = <0>; thermal-governor = "user_space"; thermal-sensors = <&pm8150b_adc_tm ADC_AMUX_THM3_PU2>; wake-capable-sensor; trips { active-config0 { temperature = <125000>; hysteresis = <1000>; type = "passive"; }; }; }; skin-therm { polling-delay-passive = <0>; polling-delay = <0>; thermal-governor = "step_wise"; thermal-sensors = <&pm8150b_adc_tm ADC_AMUX_THM1_PU2>; wake-capable-sensor; trips { skint_therm_trip0: skint_therm_trip0 { temperature = <48000>; hysteresis = <2000>; type = "passive"; }; skint_therm_trip1: skint_therm_trip1 { temperature = <49000>; hysteresis = <1000>; type = "passive"; }; skint_therm_trip2: skint_therm_trip2 { temperature = <50000>; hysteresis = <1000>; type = "passive"; }; skint_therm_trip3: skint_therm_trip3 { temperature = <52000>; hysteresis = <2000>; type = "passive"; }; }; cooling-maps { freq_dev0 { trip = <&skint_therm_trip0>; cooling-device = <&msm_gpu (THERMAL_MAX_LIMIT-2) (THERMAL_MAX_LIMIT-2)>;/*441.6*/ }; freq_dev1 { trip = <&skint_therm_trip0>; cooling-device = <&CPU4 7 7>;/*1766*/ }; freq_dev2 { trip = <&skint_therm_trip0>; cooling-device = <&CPU7 8 8>;/*2073*/ }; freq_dev3 { trip = <&skint_therm_trip1>; cooling-device = <&CPU4 9 9>;/*1478*/ }; freq_dev4 { trip = <&skint_therm_trip1>; cooling-device = <&CPU7 11 11>;/*1747*/ }; freq_dev5 { trip = <&skint_therm_trip2>; cooling-device = <&msm_gpu (THERMAL_MAX_LIMIT-1) (THERMAL_MAX_LIMIT-1)>;/*400*/ }; freq_dev6 { trip = <&skint_therm_trip2>; cooling-device = <&CPU0 3 3>;/*1516*/ }; freq_dev7 { trip = <&skint_therm_trip2>; cooling-device = <&CPU4 14 14>;/*1056.0*/ }; freq_dev8 { trip = <&skint_therm_trip2>; cooling-device = <&cpu7_isolate 1 1>; }; freq_dev9 { trip = <&skint_therm_trip3>; cooling-device = <&CPU0 10 10>;/*883.2*/ }; freq_dev10 { trip = <&skint_therm_trip3>; cooling-device = <&cpu4_isolate 1 1>; }; }; }; xo-therm-usr { polling-delay-passive = <0>; polling-delay = <0>; thermal-governor = "user_space"; thermal-sensors = <&pm8150_adc_tm ADC_XO_THERM_PU2>; wake-capable-sensor; trips { active-config0 { temperature = <125000>; hysteresis = <1000>; type = "passive"; }; }; }; skin-therm-usr { polling-delay-passive = <0>; polling-delay = <0>; thermal-governor = "user_space"; thermal-sensors = <&pm8150_adc_tm ADC_AMUX_THM1_PU2>; wake-capable-sensor; trips { active-config0 { temperature = <125000>; hysteresis = <1000>; type = "passive"; }; }; }; mmw-pa1-usr { polling-delay-passive = <0>; polling-delay = <0>; thermal-governor = "user_space"; thermal-sensors = <&pm8150_adc_tm ADC_AMUX_THM2_PU2>; wake-capable-sensor; trips { active-config0 { temperature = <125000>; hysteresis = <1000>; type = "passive"; }; }; }; camera-therm-usr { polling-delay-passive = <0>; polling-delay = <0>; thermal-governor = "user_space"; thermal-sensors = <&pm8150l_adc_tm ADC_AMUX_THM1_PU2>; wake-capable-sensor; trips { active-config0 { temperature = <125000>; hysteresis = <1000>; type = "passive"; }; }; }; skin-msm-therm-step { polling-delay-passive = <0>; polling-delay = <0>; thermal-governor = "step_wise"; thermal-sensors = <&pm8150l_adc_tm ADC_AMUX_THM2_PU2>; wake-capable-sensor; trips { msm_therm_trip0: msm_therm_trip0 { temperature = <63000>; hysteresis = <2000>; type = "passive"; }; msm_therm_trip1: msm_therm_trip1 { temperature = <65000>; hysteresis = <2000>; type = "passive"; }; }; cooling-maps { freq_dev0 { trip = <&msm_therm_trip0>; cooling-device = <&msm_gpu (THERMAL_MAX_LIMIT-3) (THERMAL_MAX_LIMIT-3)>;/*490(SVS_L1)*/ }; freq_dev1 { trip = <&msm_therm_trip0>; cooling-device = <&CPU0 2 2>;/*1612MHz(Nominal_L1)*/ }; freq_dev2 { trip = <&msm_therm_trip0>; cooling-device = <&CPU4 7 7>;/*1766.4MHz(Nominal_L1)*/ }; freq_dev3 { trip = <&msm_therm_trip0>; cooling-device = <&CPU7 8 8>;/*2073.6MHz(Nominal_L1)*/ }; freq_dev4 { trip = <&msm_therm_trip1>; cooling-device = <&msm_gpu (THERMAL_MAX_LIMIT-2) (THERMAL_MAX_LIMIT-2)>;/*441.6(SVS_L0)*/ }; freq_dev5 { trip = <&msm_therm_trip1>; cooling-device = <&CPU0 3 3>;/*1516.8MHz(Nominal)*/ }; freq_dev6 { trip = <&msm_therm_trip1>; cooling-device = <&CPU4 9 9>;/*1574.4MHz(Nominal_L1)*/ }; freq_dev7 { trip = <&msm_therm_trip1>; cooling-device = <&CPU7 12 12>;/*1632.0MHz(Nominal)*/ }; }; }; mmw-pa2-usr { polling-delay-passive = <0>; polling-delay = <0>; thermal-governor = "user_space"; thermal-sensors = <&pm8150l_adc_tm ADC_AMUX_THM3_PU2>; wake-capable-sensor; trips { active-config0 { temperature = <125000>; hysteresis = <1000>; type = "passive"; }; }; }; }; &sdhc_2 { vdd-supply = <&pm8150a_l9>; qcom,vdd-voltage-level = <2950000 2960000>; qcom,vdd-current-level = <200 800000>; vdd-io-supply = <&pm8150a_l6>; qcom,vdd-io-voltage-level = <1808000 2960000>; qcom,vdd-io-current-level = <200 22000>; pinctrl-names = "active", "sleep"; pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &storage_cd>; pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &storage_cd>; cd-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>; status = "disabled"; }; &usb1 { extcon = <&extcon_usb1>; }; &wil6210 { status = "ok"; }; //#ifdef OPLUS_FEATURE_CHG_BASIC &pm8150b_gpios { gpio7_adc { gpio7_adc_default: gpio7_adc_default { pins = "gpio7"; /* GPIO 7 */ function = "normal"; /* normal */ bias-high-impedance; /* DISABLE GPIO7 for ADC*/ }; }; gpio1_adc { gpio1_adc_default: gpio1_adc_default { pins = "gpio1"; /* GPIO 1 */ function = "normal"; /* normal */ bias-high-impedance; /* DISABLE GPIO1 for ADC*/ }; }; gpio8_adc { gpio8_adc_default: gpio8_adc_default { pins = "gpio8"; /* GPIO 8 */ function = "normal"; /* normal */ bias-high-impedance; /* DISABLE GPIO8 for ADC*/ }; }; }; // #endif &pm8150l_gpios { gpio5_adc { gpio5_adc_default: gpio5_adc_default { pins = "gpio5"; /* GPIO 5 */ function = "normal"; /* normal */ bias-high-impedance; /* DISABLE GPIO5 for ADC*/ }; }; }; //#endif &pm8150_gpios { dischg_enable: dischg_enable { pins = "gpio9"; /* GPIO 9 */ function = "normal"; /* normal */ bias-disable; //No Pull power-source = <0>;//VIN0 3.3 output-high; //digital output, no invert qcom,drive-strength = <3>; //LOW strength //drive-push-pull;//CMOS }; dischg_disable: dischg_disable { pins = "gpio9"; /* GPIO 9 */ function = "normal"; /* normal */ bias-disable; //No Pull power-source = <0>;//VIN0 3.3 output-low; //digital output, no invert qcom,drive-strength = <3>; //LOW strength //drive-push-pull;//CMOS }; mps_otg_en_active: mps_otg_en_active { pins = "gpio3"; /* GPIO 3 */ function = "normal"; /* normal */ bias-disable; //No Pull power-source = <0>;//VIN1 1.8 output-high; //digital output, no invert qcom,drive-strength = <3>; //LOW strength //drive-push-pull;//CMOS }; mps_otg_en_sleep: mps_otg_en_sleep { pins = "gpio3"; /* GPIO 3 */ function = "normal"; /* normal */ bias-disable; //No Pull power-source = <0>;//VIN1 1.8 output-low; //digital output, no invert qcom,drive-strength = <3>; //LOW strength //drive-push-pull;//CMOS }; mps_otg_en_default: mps_otg_en_default { pins = "gpio3"; /* GPIO 3 */ function = "normal"; /* normal */ bias-disable; //No Pull power-source = <0>;//VIN1 1.8 output-low; //digital output, no invert qcom,drive-strength = <3>; //LOW strength //drive-push-pull;//CMOS }; hw_id_active: hw_id_active { pins = "gpio1"; /* GPIO 1 */ function = "normal"; /* normal */ input-enable; bias-pull-up; power-source = <0>; }; hw_id_sleep: hw_id_sleep { pins = "gpio1"; /* GPIO 1 */ function = "normal"; /* normal */ input-enable; bias-pull-down; power-source = <0>; /* 1.8V input supply */ }; }; &qupv3_se5_i2c { status = "okay"; qcom,clk-freq-out = <400000>; qcom,noise-rjct-scl = <3>; qcom,noise-rjct-sda = <3>; mp2650-charger@5c { status = "okay"; compatible = "oplus,mp2650-charger"; reg = <0x5c 0>; qcom,mps_otg_en-gpio = <&pm8150_gpios 3 0x00>; pinctrl-names = "mps_otg_en_active", "mps_otg_en_sleep", "mps_otg_en_default"; pinctrl-0 = <&mps_otg_en_active>; pinctrl-1 = <&mps_otg_en_sleep>; pinctrl-2 = <&mps_otg_en_default>; }; }; &qupv3_se16_i2c { status = "okay"; qcom,clk-freq-out = <100000>; //#ifdef OPLUS_FEATURE_CHG_BASIC//Fanhong.Kong@ProDrv.CHG,add 2018/04/20 for SVOOC da9313-divider@68 { status = "okay"; compatible = "oplus,da9313-divider"; reg = <0x68 0>; }; //#endif /*OPLUS_FEATURE_CHG_BASIC*/ bq27541-battery@55 { status = "okay"; compatible = "oplus,bq27541-battery"; reg = <0x55>; qcom,modify-soc-smooth; qcom,batt_bq28z610; //qcom,bq28z610_need_balancing; qcom,modify-soc-calibration; }; rk826_fastcg@0a{ status = "okay"; compatible = "oplus,rk826-fastcg"; reg = <0x0a 0>; qcom,oplus_batt_4400mv; qcom,support_vooc_by_normal_charger_path; qcom,supported_hiz_gnd_cable; //qcom,vooc_fw_update_newmethod; qcom,vooc-high-temp = <430>; qcom,vooc-low-temp = <50>; qcom,vooc-low-soc = <1>; qcom,vooc-high-soc = <90>; qcom,vooc-fw-type = <7>; qcom,vooc_reply_mcu_bits = <4>; qcom,vooc_hw_id_no_pull_val = <2>; qcom,vooc_multistep_adjust_current_support; qcom,vooc_multistep_initial_batt_temp = <1000>; qcom,vooc_strategy_normal_current = <0x06>; qcom,vooc-normal-to-little-cool-current = <0x05>; qcom,vooc_batt_over_high_temp = <440>; qcom,vooc_batt_over_low_temp = <45>; qcom,vooc_over_high_or_low_current = <0x0>; qcom,vooc_strategy1_batt_high_temp0 = <425>; qcom,vooc_strategy1_batt_high_temp1 = <430>; qcom,vooc_strategy1_batt_high_temp2 = <435>; qcom,vooc_strategy1_batt_low_temp2 = <420>; qcom,vooc_strategy1_batt_low_temp1 = <415>; qcom,vooc_strategy1_batt_low_temp0 = <400>; qcom,vooc_strategy1_high_current0 = <0x04>;//4A qcom,vooc_strategy1_high_current1 = <0x03>;//3A qcom,vooc_strategy1_high_current2 = <0x02>;//2A qcom,vooc_strategy1_low_current2 = <0x03>;//3A qcom,vooc_strategy1_low_current1 = <0x04>;//4A qcom,vooc_strategy1_low_current0 = <0x04>;//4A qcom,vooc_strategy2_batt_up_temp1 = <375>; qcom,vooc_strategy2_batt_up_down_temp2 = <380>; qcom,vooc_strategy2_batt_up_temp3 = <390>; qcom,vooc_strategy2_batt_up_down_temp4 = <400>; qcom,vooc_strategy2_batt_up_temp5 = <410>; qcom,vooc_strategy2_batt_up_temp6 = <415>; qcom,vooc_strategy2_high0_current = <0x05>; qcom,vooc_strategy2_high1_current = <0x04>; qcom,vooc_strategy2_high2_current = <0x03>; qcom,vooc_strategy2_high3_current = <0x02>; qcom,abnormal_adapter_current = <0x00 0x00 0x05 0x05 0x04 0x04 0x03 0x03 0x02 0x02>; pinctrl-names = "switch1_act_switch2_act", "switch1_sleep_switch2_sleep", "switch1_act_switch3_act", "switch1_sleep_switch3_sleep", "switch1_act_switch2_sleep", "switch1_sleep_switch2_act", "clock_active","clock_sleep", "data_active","data_sleep", "reset_active","reset_sleep", "vooc_asic_id_active","vooc_asic_id_sleep"; pinctrl-0 = <&charging_switch1_active>; pinctrl-1 = <&charging_switch1_sleep>; pinctrl-2 = <&charging_switch1_active>; pinctrl-3 = <&charging_switch1_sleep>; pinctrl-4 = <&charging_switch1_active>; pinctrl-5 = <&charging_switch1_sleep>; pinctrl-6 = <&charging_clock_active>; pinctrl-7 = <&charging_clock_sleep>; pinctrl-8 = <&charging_data_active>; pinctrl-9 = <&charging_data_sleep>; pinctrl-10 = <&charging_reset_active>; pinctrl-11 = <&charging_reset_sleep>; pinctrl-12 = <&vooc_asic_id_active>; pinctrl-13 = <&vooc_asic_id_sleep>; qcom,charging_switch1-gpio = <&tlmm 82 0x00>; qcom,charging_switch1_ctr1-gpio = <&tlmm 141 0x00>; //qcom,charging_switch2-gpio = <&tlmm 113 0x00>; //qcom,charging_switch3-gpio = <&tlmm 38 0x00>; qcom,charging_reset-gpio = <&tlmm 10 0x00>; qcom,charging_clock-gpio = <&tlmm 54 0x00>; qcom,charging_data-gpio = <&tlmm 55 0x00>; qcom,vooc_asic_id-gpio = <&tlmm 50 0x00>; }; }; //#endif &pm8150b_charger { //for smb5: qcom,usb-icl-ua = <3000000>; qcom,fcc-max-ua = <3000000>; //qcom,fv-max-uv = <4373000>; qcom,qc3-disable; qcom,hvdcp-disable; //io-channels = <&pm8150b_vadc ADC_GPIO3>; //io-channel-names = "chgID_voltage_adc"; //qcom,otg-cl-ua = <2000000>; qcom,float-option = <1>; qcom,oplus-pps-usbpd-detection = <&pm8150b_pdphy>; //for oplus chg framework: qcom,input_current_charger_ma = <2000>; qcom,pd_input_current_charger_ma = <3000>; qcom,qc_input_current_charger_ma = <2000>; qcom,input_current_usb_ma = <500>; qcom,input_current_cdp_ma = <1500>; qcom,input_current_led_ma = <1200>; qcom,input_current_led_ma_high = <1800>; qcom,input_current_led_ma_warm = <1800>; qcom,input_current_led_ma_normal = <2000>; qcom,led_warm_bat_decidegc = <350>; qcom,led_high_bat_decidegc = <370>; qcom,input_current_camera_ma = <1200>; qcom,input_current_vooc_led_ma_high = <1800>; qcom,input_current_vooc_led_ma_warm = <1800>; qcom,input_current_vooc_led_ma_normal = <3600>; qcom,input_current_vooc_ma_normal = <3600>; qcom,vooc_temp_bat_normal_decidegc = <350>; qcom,input_current_vooc_ma_warm = <3200>; qcom,vooc_temp_bat_warm_decidegc = <370>; qcom,input_current_vooc_ma_high = <2200>; qcom,vooc_temp_bat_hot_decidegc = <440>; qcom,charger_current_vooc_ma_normal = <1800>; qcom,chg_ctrl_by_calling; qcom,input_current_calling_ma = <1500>; //qcom,input_current_led_ma_overtemp = <900>; qcom,overtemp_bat_decidegc = <350>; qcom,iterm_disabled = <0>; qcom,iterm_ma = <115>; qcom,recharge-mv = <100>; qcom,batt_capacity_mah = <4500>;/*typical capacity*/ //qcom,batt_capacity_mah = <4170>; /*rated capacity*/ qcom,removed_bat_decidegc = <190>; /*<-19C*/ qcom,cold_bat_decidegc = <20>; /*-2C~0C*/ qcom,temp_cold_vfloat_mv = <3980>; qcom,temp_cold_fastchg_current_ma = <500>; qcom,little_cold_bat_decidegc = <0>; /*0C~5C*/ qcom,temp_little_cold_vfloat_mv = <4435>; qcom,temp_little_cold_fastchg_current_ma_high = <950>; qcom,temp_little_cold_fastchg_current_ma_low = <950>; qcom,temp_little_cold_fastchg_current_ma = <950>; qcom,pd_temp_little_cold_fastchg_current_ma_high = <2000>; qcom,pd_temp_little_cold_fastchg_current_ma_low = <1000>; qcom,qc_temp_little_cold_fastchg_current_ma_high = <2000>; qcom,qc_temp_little_cold_fastchg_current_ma_low = <1000>; qcom,cool_bat_decidegc = <50>; /*5C~12C*/ qcom,temp_cool_vfloat_mv = <4435>; qcom,temp_cool_fastchg_current_ma_high = <1100>; qcom,temp_cool_fastchg_current_ma_low = <1100>; qcom,pd_temp_cool_fastchg_current_ma_high = <2000>; qcom,pd_temp_cool_fastchg_current_ma_low = <1000>; qcom,qc_temp_cool_fastchg_current_ma_high = <2000>; qcom,qc_temp_cool_fastchg_current_ma_low = <1000>; qcom,little_cool_bat_decidegc = <120>; /*12C~16C*/ qcom,temp_little_cool_vfloat_mv = <4435>; qcom,temp_little_cool_fastchg_current_ma = <1100>; qcom,pd_temp_little_cool_fastchg_current_ma = <3000>; qcom,qc_temp_little_cool_fastchg_current_ma = <2000>; qcom,normal_bat_decidegc = <160>; /*16C~44C*/ qcom,temp_normal_fastchg_current_ma = <1100>; qcom,temp_normal_vfloat_mv = <4435>; qcom,pd_temp_normal_fastchg_current_ma = <3000>; qcom,qc_temp_normal_fastchg_current_ma = <2000>; qcom,warm_bat_decidegc = <450>; /*45C~50C*/ /*8pin Bat Vooc project need add 3 degree C*/ qcom,temp_warm_vfloat_mv = <4130>; qcom,temp_warm_fastchg_current_ma = <600>; qcom,pd_temp_warm_fastchg_current_ma = <600>; qcom,qc_temp_warm_fastchg_current_ma = <600>; qcom,temp_warm_fastchg_current_ma_led_on = <250>; qcom,hot_bat_decidegc = <500>; qcom,non_standard_vfloat_mv = <3980>; qcom,non_standard_fastchg_current_ma = <512>; qcom,short_c_bat_cv_mv = <4330>; qcom,short_c_bat_vfloat_mv = <3800>; qcom,short_c_bat_fastchg_current_ma = <512>; qcom,cold_vfloat_sw_limit = <3980>; qcom,little_cold_vfloat_sw_limit = <4385>; qcom,cool_vfloat_sw_limit = <4385>; qcom,little_cool_vfloat_sw_limit = <4385>; qcom,normal_vfloat_sw_limit = <4385>; qcom,warm_vfloat_sw_limit = <4080>; qcom,non_standard_vfloat_sw_limit = <3930>; qcom,short_c_bat_vfloat_sw_limit = <3750>; qcom,max_chg_time_sec = <36000>; qcom,charger_hv_thr = <9900>; qcom,charger_recv_thr = <9500>; qcom,charger_lv_thr = <3400>; qcom,vbatt_full_thr = <4435>; qcom,vbatt_hv_thr = <4600>; qcom,vfloat_step_mv = <8>; qcom,non_standard_vfloat_over_sw_limit = <3990>; qcom,cold_vfloat_over_sw_limit = <3990>; qcom,little_cold_vfloat_over_sw_limit = <4445>; qcom,cool_vfloat_over_sw_limit = <4445>; qcom,little_cool_vfloat_over_sw_limit = <4445>; qcom,normal_vfloat_over_sw_limit = <4445>; qcom,warm_vfloat_over_sw_limit = <4140>; qcom,vbatt_power_off = <3250>; qcom,vbatt_soc_1 = <3310>; qcom,vooc_project = <3>; qcom,vbatt_num = <2>; qcom,ffc_support; qcom,dual_ffc; recharge_after_full; qcom,normal_vterm_hw_inc = <18>; qcom,non_normal_vterm_hw_inc = <18>; qcom,ff1_normal_fastchg_ma = <550>; qcom,ff1_warm_fastchg_ma = <550>; qcom,ffc2_normal_fastchg_ma = <350>;/*12C~35c*/ qcom,ffc2_temp_warm_decidegc = <350>; qcom,ffc2_warm_fastchg_ma = <350>;/*35C~40c*/ qcom,ffc2_temp_high_decidegc = <400>; qcom,ffc2_temp_low_decidegc = <120>; qcom,ffc2_exit_step_ma = <150>; qcom,ff1_exit_step_ma = <150>; qcom,ff1_warm_exit_step_ma = <150>; qcom,ffc_normal_vfloat_sw_limit = <4455>; qcom,ffc2_normal_vfloat_sw_limit = <4445>; qcom,ffc2_warm_vfloat_sw_limit = <4440>; qcom,ffc_temp_normal_vfloat_mv = <4500>; qcom,ffc1_temp_normal_vfloat_mv = <4500>; qcom,ffc2_temp_normal_vfloat_mv = <4500>; qcom,ffc_normal_vfloat_over_sw_limit = <4500>; qcom,ffc1_normal_vfloat_over_sw_limit = <4500>; qcom,ffc2_normal_vfloat_over_sw_limit = <4500>; qcom,default_iterm_ma = <115>; qcom,default_temp_normal_fastchg_current_ma = <1100>; qcom,default_normal_vfloat_sw_limit = <4385>; qcom,default_temp_normal_vfloat_mv = <4435>; qcom,default_normal_vfloat_over_sw_limit = <4445>; qcom,default_temp_little_cool_fastchg_current_ma = <1100>; qcom,default_little_cool_vfloat_sw_limit = <4385>; qcom,default_temp_little_cool_vfloat_mv = <4435>; qcom,default_little_cool_vfloat_over_sw_limit = <4445>; ///qcom,offset_temp = <30>; //for control: //qcom,suspend_after_full; qcom,check_batt_full_by_sw; qcom,external_gauge; qcom,chg_ctrl_by_lcd; qcom,chg_ctrl_by_vooc; qcom,chg_ctrl_by_camera; qcom,sw_vfloat_over_protect_enable; qcom,lpd-disable; qcom,skip_usbtemp_cool_down; qcom,support_abnormal_adapter; //for PD9V or QC9V qcom,vbatt_pdqc_to_5v_thr = <4100>; qcom,vooc_show_ui_soc_decimal; qcom,ui_soc_decimal_speedmin = <20>;//2A qcom,chargerid_switch-gpio = <&tlmm 47 0x00>; qcom,chargerid_switch-gpio-pvt = <&tlmm 46 0x00>; qcom,ship-gpio = <&tlmm 22 0x00>; qcom,ccdetect-gpio = <&tlmm 14 0x00>; //qcom,shortc-gpio = <&tlmm 43 0x00>; qcom,dischg-gpio = <&pm8150_gpios 9 0x00>; //qcom,charger_int-gpio = <&tlmm 15 0x00>; //qcom,input_pg-gpio = <&tlmm 6 0x00>; //qcom,charger_error-gpio = <&tlmm 118 0x00>; pinctrl-names = "default", "chargerid_switch_active", "chargerid_switch_sleep", "chargerid_switch_default", "chargerid_switch_pvt_active", "chargerid_switch_pvt_sleep", "chargerid_switch_pvt_default", "ship_active", "ship_sleep", "ccdetect_active", "ccdetect_sleep", "dischg_enable", "dischg_disable", "gpio1_adc_default","gpio8_adc_default","gpio5_adc_default", "charger_int_default", "input_pg_default", "charger_error_default"; pinctrl-0 = <&gpio7_adc_default>; pinctrl-1 = <&chargerid_switch_active>; pinctrl-2 = <&chargerid_switch_sleep>; pinctrl-3 = <&chargerid_switch_default>; pinctrl-4 = <&chargerid_switch_pvt_active>; pinctrl-5 = <&chargerid_switch_pvt_sleep>; pinctrl-6 = <&chargerid_switch_pvt_default>; pinctrl-7 = <&ship_active>; pinctrl-8 = <&ship_sleep>; pinctrl-9 = <&ccdetect_active>; pinctrl-10 = <&ccdetect_sleep>; pinctrl-11 = <&dischg_enable>; pinctrl-12 = <&dischg_disable>; pinctrl-13 = <&gpio1_adc_default>; pinctrl-14 = <&gpio8_adc_default>; pinctrl-15 = <&gpio5_adc_default>; pinctrl-16 = <&charger_int_default>; pinctrl-17 = <&input_pg_default>; pinctrl-18 = <&charger_error_default>; }; &soc { oplus,track-charge { compatible = "oplus,track-charge"; track,fast_chg_break_t_thd = <1000>; track,general_chg_break_t_thd = <200>; track,voocphy_type = <4>; track,wired_max_power = <65000>; track,wired_fast_chg_scheme = <1>; }; }; //#endif //OPLUS_FEATURE_CHG_BASIC &qupv3_se1_i2c { status = "ok"; qcom,clk-freq-out = <400000>; ist8801@19 { compatible = "oplus,hall-ist8801,up"; reg = <0x19>; dhall,id = <1>; vdd-supply = <&pm8150a_l10>; interrupt-parent = <&tlmm>; interrups = <157 0x02>; dhall,irq-gpio = <&tlmm 157 0x2008>; pinctrl-names = "ist8801_hall_up_active"; pinctrl-0 = <&ist8801_hall_up_active>; }; ist8801@18 { compatible = "oplus,hall-ist8801,down"; reg = <0x18>; dhall,id = <2>; vdd-supply = <&pm8150a_l10>; interrupt-parent = <&tlmm>; interrups = <138 0x02>; dhall,irq-gpio = <&tlmm 138 0x2008>; pinctrl-names = "ist8801_hall_down_active"; pinctrl-0 = <&ist8801_hall_down_active>; }; }; &qupv3_se1_i2c { status = "ok"; qcom,clk-freq-out = <400000>; magnachip@0D { compatible = "oplus,hall-mxm1120,up"; reg = <0x0D>; dhall,id = <1>; vdd-supply = <&pm8150a_l10>; interrupt-parent = <&tlmm>; interrups = <157 0x02>; dhall,irq-gpio = <&tlmm 157 0x2008>; pinctrl-names = "uphall_tri_state_key_active"; pinctrl-0 = <&uphall_tri_state_key_active>; }; magnachip@0C { compatible = "oplus,hall-mxm1120,down"; reg = <0x0C>; dhall,id = <2>; vdd-supply = <&pm8150a_l10>; interrupt-parent = <&tlmm>; interrups = <138 0x02>; dhall,irq-gpio = <&tlmm 138 0x2008>; pinctrl-names = "downhall_tri_state_key_active"; pinctrl-0 = <&downhall_tri_state_key_active>; }; }; &tlmm { ist8801_hall_up_active: ist8801_hall_up_active { mux { pins = "gpio157"; function = "gpio"; }; config { pins = "gpio157"; drive-strength = <2>; bias-pull-up; }; }; ist8801_hall_down_active: ist8801_hall_down_active { mux { pins = "gpio138"; function = "gpio"; }; config { pins = "gpio138"; drive-strength = <2>; bias-pull-up; }; }; }; &tlmm { uphall_tri_state_key_active: uphall_tri_state_key_active { mux { pins = "gpio157"; function = "gpio"; }; config { pins = "gpio157"; drive-strength = <2>; bias-pull-up; }; }; downhall_tri_state_key_active: downhall_tri_state_key_active { mux { pins = "gpio138"; function = "gpio"; }; config { pins = "gpio138"; drive-strength = <2>; bias-pull-up; }; }; }; &qupv3_se2_i2c { status = "ok"; #include "pm8008.dtsi" }; &pm8008_regulators { vdd_l1_l2-supply = <&S8C>; vdd_l3_l4-supply = <&BOB>; vdd_l5-supply = <&BOB>; vdd_l6-supply = <&BOB>; vdd_l7-supply = <&BOB>; }; &L4P { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; &tlmm { pm8008_interrupt: pm8008_interrupt { mux { pins = "gpio112"; function = "gpio"; }; config { pins = "gpio112"; bias-disable; input-enable; }; }; pm8008_active: pm8008_active { mux { pins = "gpio93"; function = "gpio"; }; config { pins = "gpio93"; bias-pull-up; output-high; drive-strength = <2>; }; }; }; &pm8008_8 { /* PM8008 IRQ STAT */ interrupt-parent = <&tlmm>; interrupts = <112 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&pm8008_active &pm8008_interrupt>; }; &soc { oem_rf_cable:oem_rf_cable { compatible = "oem,rf_cable"; interrupt-parent = <&tlmm>; rf,cable-gpio-0 = <&tlmm 109 0>; rf,cable-gpio-1 = <&tlmm 162 0>; rf,cable-gpio-2 = <&tlmm 175 0>; rf,cable-gpio-3 = <&tlmm 129 0>; rf,cable-support-timer = <0>; rf,cable-gpio-num = <4>; oem,rf_uevent_feature_enable; pinctrl-names = "oem_rf_cable_active"; pinctrl-0 = <&rf_cable_ant0_active &rf_cable_ant1_active &rf_cable_ant2_active &rf_cable_ant3_active>; }; }; &tlmm { rf_cable_ant0_active: rf_cable_ant0_active { mux { pins = "gpio109"; function = "gpio"; }; config { pins = "gpio109"; drive-strength = <2>; bias-pull-up; }; }; rf_cable_ant1_active: rf_cable_ant1_active { mux { pins = "gpio162"; function = "gpio"; }; config { pins = "gpio162"; drive-strength = <2>; bias-pull-up; }; }; rf_cable_ant2_active: rf_cable_ant2_active { mux { pins = "gpio175"; function = "gpio"; }; config { pins = "gpio175"; drive-strength = <2>; bias-pull-up; }; }; rf_cable_ant3_active: rf_cable_ant3_active { mux { pins = "gpio129"; function = "gpio"; }; config { pins = "gpio129"; drive-strength = <2>; bias-pull-up; }; }; };