#include <dt-bindings/input/input.h>
#include <dt-bindings/input/qcom,qpnp-power-on.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
#include <dt-bindings/iio/qcom,spmi-vadc.h>

&spmi_bus {
	#address-cells = <2>;
	#size-cells = <0>;
	interrupt-controller;
	#interrupt-cells = <4>;

	qcom,pm2250@0 {
		compatible = "qcom,spmi-pmic";
		reg = <0x0 SPMI_USID>;
		#address-cells = <2>;
		#size-cells = <0>;

		pm2250_revid: qcom,revid@100 {
			compatible = "qcom,qpnp-revid";
			reg = <0x100 0x100>;
		};

		qcom,power-on@800 {
			compatible = "qcom,qpnp-power-on";
			reg = <0x800 0x100>;
			interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>,
					<0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>;
			interrupt-names = "kpdpwr", "resin";
			qcom,pon-dbc-delay = <15625>;
			qcom,kpdpwr-sw-debounce;
			qcom,system-reset;
			qcom,store-hard-reset-reason;

			qcom,pon_1 {
				qcom,pon-type = <PON_POWER_ON_TYPE_KPDPWR>;
				qcom,pull-up = <1>;
				linux,code = <KEY_POWER>;
			};

			qcom,pon_2 {
				qcom,pon-type = <PON_POWER_ON_TYPE_RESIN>;
				qcom,pull-up = <1>;
				linux,code = <KEY_VOLUMEDOWN>;
			};
		};

		pm2250_tz: qcom,temp-alarm@2400 {
			compatible = "qcom,spmi-temp-alarm";
			reg = <0x2400 0x100>;
			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
			io-channels = <&pm2250_vadc ADC_DIE_TEMP>;
			io-channel-names = "thermal";
			#thermal-sensor-cells = <0>;
			qcom,temperature-threshold-set = <1>;
		};

		pm2250_vadc: vadc@3100 {
			compatible = "qcom,spmi-adc5-lite";
			reg = <0x3100 0x100>;
			reg-names = "adc5-usr-base";
			#address-cells = <1>;
			#size-cells = <0>;
			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
			interrupt-names = "eoc-int-en-set";
			#io-channel-cells = <1>;
			io-channel-ranges;

			/* Channel nodes */
			ref_gnd {
				reg = <ADC_REF_GND>;
				label = "ref_gnd";
				qcom,pre-scaling = <1 1>;
			};

			vref_1p25 {
				reg = <ADC_1P25VREF>;
				label = "vref_1p25";
				qcom,pre-scaling = <1 1>;
			};

			die_temp {
				reg = <ADC_DIE_TEMP>;
				label = "die_temp";
				qcom,pre-scaling = <1 1>;
			};

			vph_pwr {
				reg = <ADC_VPH_PWR>;
				label = "vph_pwr";
				qcom,pre-scaling = <1 3>;
			};

			vbat_sns {
				reg = <ADC_VBAT_SNS>;
				label = "vbat_sns";
				qcom,pre-scaling = <1 3>;
			};

			usb_in_v_div_16 {
				reg = <ADC_USB_IN_V_16>;
				label = "usb_in_v_div_16";
				qcom,pre-scaling = <1 16>;
			};

			chg_temp {
				reg = <ADC_CHG_TEMP>;
				label = "chg_temp";
				qcom,pre-scaling = <1 1>;
			};

			bat_therm {
				reg = <ADC_BAT_THERM_PU2>;
				label = "bat_therm";
				qcom,ratiometric;
				qcom,hw-settle-time = <200>;
				qcom,pre-scaling = <1 1>;
			};

			bat_therm_30k {
				reg = <ADC_BAT_THERM_PU1>;
				label = "bat_therm_30k";
				qcom,ratiometric;
				qcom,hw-settle-time = <200>;
				qcom,pre-scaling = <1 1>;
			};

			bat_therm_400k {
				reg = <ADC_BAT_THERM_PU3>;
				label = "bat_therm_400k";
				qcom,ratiometric;
				qcom,hw-settle-time = <200>;
				qcom,pre-scaling = <1 1>;
			};

			bat_id {
				reg = <ADC_BAT_ID_PU2>;
				label = "bat_id";
				qcom,ratiometric;
				qcom,hw-settle-time = <200>;
				qcom,pre-scaling = <1 1>;
			};
		};


		pm2250_gpios: pinctrl@c000 {
			compatible = "qcom,spmi-gpio";
			reg = <0xc000 0xa00>;
			interrupts = <0x0 0xc0 0 IRQ_TYPE_NONE>,
					<0x0 0xc1 0 IRQ_TYPE_NONE>,
					<0x0 0xc2 0 IRQ_TYPE_NONE>,
					<0x0 0xc3 0 IRQ_TYPE_NONE>,
					<0x0 0xc4 0 IRQ_TYPE_NONE>,
					<0x0 0xc5 0 IRQ_TYPE_NONE>,
					<0x0 0xc6 0 IRQ_TYPE_NONE>,
					<0x0 0xc7 0 IRQ_TYPE_NONE>,
					<0x0 0xc8 0 IRQ_TYPE_NONE>,
					<0x0 0xc9 0 IRQ_TYPE_NONE>;

			interrupt-names = "pm2250_gpio1", "pm2250_gpio2",
					"pm2250_gpio3", "pm2250_gpio4",
					"pm2250_gpio5", "pm2250_gpio6",
					"pm2250_gpio7", "pm2250_gpio8",
					"pm2250_gpio9", "pm2250_gpio10";

			gpio-controller;
			#gpio-cells = <2>;
		};

		pm2250_rtc: qcom,pm2250_rtc {
			compatible = "qcom,pm8941-rtc";
			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
		};

		pm2250_cdc: qcom,pm2250-cdc {
			compatible = "qcom,pm2250-spmi";
		};

		pm2250_qg: qpnp,qg {
			compatible = "qcom,qpnp-qg-lite";
			#address-cells = <1>;
			#size-cells = <1>;

			qcom,vbatt-cutoff-mv = <3400>;
			qcom,vbatt-low-mv = <3500>;
			qcom,vbatt-low-cold-mv = <3800>;
			qcom,vbatt-empty-mv = <3200>;
			qcom,vbatt-empty-cold-mv = <3000>;
			qcom,s3-entry-fifo-length = <2>;

			qcom,pmic-revid = <&pm2250_revid>;
			io-channels = <&pm2250_vadc ADC_BAT_THERM_PU2>,
				      <&pm2250_vadc ADC_BAT_ID_PU2>;
			io-channel-names = "batt-therm", "batt-id";

			qcom,qgauge@4800 {
				status = "okay";
				reg = <0x4800 0x100>;
				interrupts =
					<0x0 0x48 0x2 IRQ_TYPE_EDGE_RISING>,
					<0x0 0x48 0x3 IRQ_TYPE_EDGE_RISING>,
					<0x0 0x48 0x5 IRQ_TYPE_EDGE_RISING>;
				interrupt-names = "qg-vbat-empty",
						  "qg-fifo-done",
						  "qg-good-ocv";
			};

			qcom,qg-sdam@b600 {
				status = "okay";
				reg = <0xb600 0x100>;
			};
		};

		pm2250_charger: qcom,qpnp-smblite {
			compatible = "qcom,qpnp-smblite";
			#address-cells = <1>;
			#size-cells = <1>;
			#cooling-cells = <2>;

			qcom,pmic-revid = <&pm2250_revid>;
			qcom,chgr@1000 {
				reg = <0x1000 0x100>;
				interrupts =
					<0x0 0x10 0x1 IRQ_TYPE_EDGE_RISING>,
					<0x0 0x10 0x0 IRQ_TYPE_EDGE_RISING>,
					<0x0 0x10 0x4 IRQ_TYPE_EDGE_RISING>,
					<0x0 0x10 0x7 IRQ_TYPE_EDGE_RISING>;

				interrupt-names = "chgr-error",
						  "chg-state-change",
						  "buck-oc",
						  "vph-ov";
			};

			qcom,dcdc@1100 {
				reg = <0x1100 0x100>;
				interrupts =
					<0x0 0x11 0x0 IRQ_TYPE_EDGE_RISING>,
					<0x0 0x11 0x1 IRQ_TYPE_EDGE_RISING>,
					<0x0 0x11 0x2 IRQ_TYPE_EDGE_RISING>,
					<0x0 0x11 0x6 IRQ_TYPE_EDGE_RISING>,
					<0x0 0x11 0x7 IRQ_TYPE_EDGE_BOTH>;

				interrupt-names = "otg-fail",
						  "otg-fault",
						  "skip-mode",
						  "input-current-limiting",
						  "switcher-power-ok";
			};

			qcom,batif@1200 {
				reg = <0x1200 0x100>;
				interrupts =
					<0x0 0x12 0x0 IRQ_TYPE_EDGE_BOTH>,
					<0x0 0x12 0x1 IRQ_TYPE_EDGE_BOTH>,
					<0x0 0x12 0x2 IRQ_TYPE_EDGE_BOTH>,
					<0x0 0x12 0x3 IRQ_TYPE_EDGE_BOTH>,
					<0x0 0x12 0x4 IRQ_TYPE_EDGE_RISING>;

				interrupt-names = "bat-temp",
						  "bat-therm-or-id-missing",
						  "bat-low",
						  "bat-ov",
						  "bsm-active";
			};

			qcom,usb@1300 {
				reg = <0x1300 0x100>;
				interrupts =
					<0x0 0x13 0x0 IRQ_TYPE_EDGE_BOTH>,
					<0x0 0x13 0x1 IRQ_TYPE_EDGE_BOTH>,
					<0x0 0x13 0x2 IRQ_TYPE_EDGE_BOTH>,
					<0x0 0x13 0x3 IRQ_TYPE_EDGE_BOTH>,
					<0x0 0x13 0x4 IRQ_TYPE_EDGE_RISING>,
					<0x0 0x13 0x6 IRQ_TYPE_EDGE_RISING>;

				interrupt-names = "usbin-plugin",
						  "usbin-collapse",
						  "usbin-uv",
						  "usbin-ov",
						  "usbin-gtvt",
						  "usbin-icl-change";
			};

			qcom,typec@1500 {
				reg = <0x1500 0x100>;
				interrupts =
					<0x0 0x15 0x0 IRQ_TYPE_EDGE_BOTH>,
					<0x0 0x15 0x1 IRQ_TYPE_EDGE_BOTH>,
					<0x0 0x15 0x2 IRQ_TYPE_EDGE_RISING>,
					<0x0 0x15 0x4 IRQ_TYPE_EDGE_BOTH>,
					<0x0 0x15 0x5 IRQ_TYPE_EDGE_RISING>,
					<0x0 0x15 0x6 IRQ_TYPE_EDGE_RISING>,
					<0x0 0x15 0x7 IRQ_TYPE_EDGE_RISING>;

				interrupt-names = "typec-or-rid-detect-change",
						  "typec-vpd-detect",
						  "typec-cc-state-change",
						  "typec-vbus-change",
						  "typec-attach-detach",
						  "typec-legacy-cable-detect",
						  "typec-try-snk-src-detect";
			};

			qcom,misc@1600 {
				reg = <0x1600 0x100>;
				interrupts =
					<0x0 0x16 0x0 IRQ_TYPE_EDGE_RISING>,
					<0x0 0x16 0x1 IRQ_TYPE_EDGE_RISING>,
					<0x0 0x16 0x2 IRQ_TYPE_EDGE_RISING>,
					<0x0 0x16 0x3 IRQ_TYPE_EDGE_RISING>,
					<0x0 0x16 0x4 IRQ_TYPE_EDGE_RISING>,
					<0x0 0x16 0x5 IRQ_TYPE_EDGE_RISING>,
					<0x0 0x16 0x6 IRQ_TYPE_EDGE_BOTH>;

				interrupt-names = "wdog-snarl",
						  "wdog-bark",
						  "aicl-fail",
						  "aicl-done",
						  "imp-trigger",
						  "all-chnl-cond-done",
						  "temp-change";
			};

			qcom,schgm-flashlite@a600 {
				reg = <0xa600 0x100>;
				interrupts =
					<0x0 0xa6 0x2 IRQ_TYPE_EDGE_RISING>,
					<0x0 0xa6 0x5 IRQ_TYPE_EDGE_RISING>,
					<0x0 0xa6 0x6 IRQ_TYPE_EDGE_RISING>,
					<0x0 0xa6 0x7 IRQ_TYPE_EDGE_BOTH>;

				interrupt-names = "flash-state-change",
						"ilim1-s1",
						"ilim2-s2",
						"vreg-ok";
			};
		};
	};

	pm2250_1: qcom,pm2250@1 {
		compatible = "qcom,spmi-pmic";
		reg = <0x1 SPMI_USID>;
		#address-cells = <2>;
		#size-cells = <0>;

		pm2250_vib: qcom,vibrator@5600 {
			compatible = "qcom,qpnp-vibrator-ldo";
			reg = <0x5600 0x100>;
			qcom,vib-ldo-volt-uv = <3000000>;
			qcom,disable-overdrive;
		};

		pm2250_pwm1: qcom,pwms@bc00 {
			compatible = "qcom,pwm-lpg";
			reg = <0xbc00 0x100>;
			reg-names = "lpg-base";
			qcom,num-lpg-channels = <1>;
			#pwm-cells = <2>;
		};

		pm2250_pwm2: qcom,pwms@bd00 {
			compatible = "qcom,pwm-lpg";
			reg = <0xbd00 0x100>;
			reg-names = "lpg-base";
			qcom,num-lpg-channels = <1>;
			#pwm-cells = <2>;
		};

		pm2250_pwm3: qcom,pwms@be00 {
			compatible = "qcom,pwm-lpg";
			reg = <0xbe00 0x100>;
			reg-names = "lpg-base";
			qcom,num-lpg-channels = <1>;
			#pwm-cells = <2>;
		};

		pm2250_rg_leds: qcom,rg_leds {
			compatible = "pwm-leds";

			red {
				label = "red";
				pwms = <&pm2250_pwm1 0 1000000>;
				max-brightness = <255>;
				linux,default-trigger = "timer";
			};

			green {
				label = "green";
				pwms = <&pm2250_pwm2 0 1000000>;
				max-brightness = <255>;
				linux,default-trigger = "timer";
			};
		};

		pm2250_flash: qcom,flash_led@d300 {
			compatible = "qcom,pm2250-flash-led";
			reg = <0xd300>;
			interrupts = <0x1 0xd3 0x0 IRQ_TYPE_EDGE_RISING>,
				     <0x1 0xd3 0x3 IRQ_TYPE_EDGE_RISING>,
				     <0x1 0xd3 0x4 IRQ_TYPE_EDGE_RISING>;
			interrupt-names = "led-fault-irq",
					  "all-ramp-down-done-irq",
					  "all-ramp-up-done-irq";

			pm2250_flash0: qcom,flash_0 {
				label = "flash";
				qcom,led-name = "led:flash_0";
				qcom,max-current-ma = <1000>;
				qcom,default-led-trigger = "flash0_trigger";
				qcom,id = <0>;
				qcom,duration-ms = <1280>;
				qcom,ires-ua = <12500>;
			};

			pm2250_torch0: qcom,torch_0 {
				label = "torch";
				qcom,led-name = "led:torch_0";
				qcom,max-current-ma = <200>;
				qcom,default-led-trigger = "torch0_trigger";
				qcom,id = <0>;
				qcom,ires-ua = <12500>;
			};

			pm2250_switch0: qcom,led_switch_0 {
				label = "switch";
				qcom,led-name = "led:switch_0";
				qcom,led-mask = <1>;
				qcom,default-led-trigger = "switch0_trigger";
			};
		};

		bcl_soc: bcl-soc {
			compatible = "qcom,msm-bcl-soc";
			#thermal-sensor-cells = <0>;
		};
	};
};

&thermal_zones {
	pm2250-tz {
		polling-delay-passive = <100>;
		polling-delay = <0>;
		thermal-governor = "step_wise";
		thermal-sensors = <&pm2250_tz>;
		wake-capable-sensor;

		trips {
			pm2250_trip0: trip0 {
				temperature = <95000>;
				hysteresis = <0>;
				type = "passive";
			};

			pm2250_trip1: trip1 {
				temperature = <115000>;
				hysteresis = <0>;
				type = "passive";
			};

			trip2 {
				temperature = <145000>;
				hysteresis = <0>;
				type = "passive";
			};
		};
	};

	soc {
		polling-delay-passive = <100>;
		polling-delay = <0>;
		thermal-governor = "low_limits_cap";
		thermal-sensors = <&bcl_soc>;
		wake-capable-sensor;
		tracks-low;

		trips {
			pm2250_low_soc: low-soc {
				temperature = <10>;
				hysteresis = <0>;
				type = "passive";
			};
		};
	};
};