/* SPDX-License-Identifier: GPL-2.0-only */ /* * Copyright (C) 2018-2020 Oplus. All rights reserved. */ #ifndef SEC_H_S6D7AT0 #define SEC_H_S6D7AT0 /*********PART1:Head files**********************/ #include #ifdef CONFIG_FB #include #include #endif #include "../sec_common.h" /*********PART2:Define Area**********************/ #define GESTURE_DOUBLECLICK 0x01 #define GESTURE_UP_V 0x02 #define GESTURE_DOWN_V 0x03 #define GESTURE_LEFT_V 0x04 #define GESTURE_RIGHT_V 0x05 #define GESTURE_O 0x06 #define GESTURE_UP 0x0B #define GESTURE_DOWN 0x0A #define GESTURE_LEFT 0x09 #define GESTURE_RIGHT 0x08 #define GESTURE_M 0x0C #define GESTURE_W 0x0D #define GESTURE_DOUBLE_LINE 0x07 #define GESTURE_EARSENSE 0x0E #define RESET_TO_NORMAL_TIME (70) #define SEC_EVENT_BUFF_SIZE 8 #define MAX_EVENT_COUNT 32 #define SEC_FW_BLK_DEFAULT_SIZE (256) #define SEC_FW_BLK_SIZE_MAX (512) #define SEC_FW_HEADER_SIGN 0x54464953 #define SEC_FW_CHUNK_SIGN 0x53434654 #define SEC_SELFTEST_REPORT_SIZE 80 #define SEC_COORDINATE_ACTION_NONE 0 #define SEC_COORDINATE_ACTION_PRESS 1 #define SEC_COORDINATE_ACTION_MOVE 2 #define SEC_COORDINATE_ACTION_RELEASE 3 /* SEC event id */ #define SEC_COORDINATE_EVENT 0 #define SEC_STATUS_EVENT 1 #define SEC_GESTURE_EVENT 2 #define SEC_EMPTY_EVENT 3 //sec status type #define TYPE_STATUS_EVENT_ERR 1 #define TYPE_STATUS_EVENT_INFO 2 #define TYPE_STATUS_EVENT_VENDOR_INFO 7 /* SEC_TS_INFO : Info acknowledge event */ #define SEC_ACK_BOOT_COMPLETE 0x00 #define SEC_ACK_WET_MODE 0x01 #define SEC_ACK_PALM_MODE 0x02 #define SEC_VENDOR_ACK_OFFSET_CAL_DONE 0x40 #define SEC_VENDOR_ACK_SELF_TEST_DONE 0x41 #define SEC_VENDOR_ACK_MIS_CAL_CHECK_DONE 0x43 #define SEC_VENDOR_ACK_NOISE_MODE 0x64 /* SEC_TS_ERROR : Error event */ #define SEC_ERR_EVNET_CORE_ERR 0x0 #define SEC_ERR_EVENT_QUEUE_FULL 0x01 #define SEC_ERR_EVENT_ESD 0x2 //earsense status #define SEC_STATUS_EARDETECTED 0x84 //boot status #define SEC_STATUS_BOOT_MODE 0x10 #define SEC_STATUS_APP_MODE 0x20 #define STATE_MANAGE_ON 1 #define STATE_MANAGE_OFF 0 #define CS_LOW 0 #define CS_HIGH 1 #define BYTE_PER_PAGE 256 #define SEC_TS_WAIT_RETRY_CNT 100 #define SEC_TS_FLASH_WIP_MASK 0x01 #define SEC_TS_FLASH_SIZE_256 256 //touchfunction #define SEC_BIT_SETFUNC_TOUCH (1 << 0) #define SEC_BIT_SETFUNC_CHARGER (1 << 4) #define SEC_BIT_SETFUNC_PALM (1 << 5) #define SEC_BIT_SETFUNC_HEADSET (1 << 6) #define SEC_FLASH_SELFTEST_REPORT_ADDR 0x02b054 #define SEC_FLASH_LP_SELFTEST_REPORT_ADDR 0x034014 #define SELFTEST_FRAME_MAX_SIZE 32*32 #define SELFTEST_FRAME_SIZE 32*18*2 #define SEC_TOUCH_IRQ_LOW_CNT 2 #define SEC_TOUCH_ESD_CNT 2 #define SEC_TOUCH_ESD_CHECK_PERIOD 200 //cmd #define SEC_CMD_SENSE_ON 0x10 #define SEC_CMD_SENSE_OFF 0x11 #define SEC_CMD_SOFT_RESET 0x12 #define SEC_CMD_VROM_RESET 0x42 #define SEC_CMD_FACTORY_PANELCALIBRATION 0x14 #define SEC_CMD_READ_CALIBRATION_REPORT 0xF1 #define SEC_CMD_MIS_CAL_CHECK 0xA7 #define SEC_CMD_MIS_CAL_READ 0xA8 #define SEC_CMD_MIS_CAL_SPEC 0xA9 #define SEC_READ_FIRMWARE_INTEGRITY 0x21 #define SEC_READ_DEVICE_ID 0x22 //for custom to print IC info #define SEC_READ_ID 0x52 //for debug with IC touch mode #define SEC_CMD_SET_TOUCHFUNCTION 0x30 #define SEC_CMD_WAKEUP_GESTURE_MODE 0x39 #define SEC_CMD_SET_POWER_MODE 0xE4 #define SEC_CMD_SET_CHARGER_MODE 0x32 #define SEC_CMD_ENTER_FW_MODE 0x57 #define SEC_CMD_EDGE_DEADZONE 0xE5 #define SEC_READ_ONE_EVENT 0x60 #define SEC_READ_ALL_EVENT 0x61 #define SEC_CMD_CLEAR_EVENT_STACK 0x62 #define SEC_READ_GESTURE_EVENT 0x90 #define SEC_CMD_MUTU_RAW_TYPE 0x70 #define SEC_CMD_SELF_RAW_TYPE 0x71 #define SEC_READ_TOUCH_RAWDATA 0x72 //read all frame rawdata(ordered by RX len) #define SEC_READ_TOUCH_SELF_RAWDATA 0x73 #define SEC_READ_TOUCH_SETLEN_RAWDATA 0x74 //read out self define length rawdata(ordered by TX len) #define SEC_CMD_TOUCH_RAWDATA_SETLEN 0x75 //set rawdata length of reading #define SEC_CMD_TOUCH_DELTA_READ 0x76 //cmd to read delta data #define SEC_CMD_TOUCH_RAWDATA_READ 0x77 //cmd to read rawdata data #define SEC_CMD_TOUCH_SELFDATA_READ 0x78 //cmd to read self data #define SEC_CMD_SENSITIVITY_MODE 0x77 #define SEC_READ_SENSITIVITY_VALUE 0x78 #define SEC_CMD_AFE_SENSING 0x7C #define SEC_CMD_HOPPING 0x7C #define SEC_READ_BOOT_STATUS 0x55 #define SEC_READ_TS_STATUS 0xAF #define SEC_READ_FW_VERSION 0xA3 #define SEC_READ_CONFIG_VERSION 0xA4 #define SEC_READ_IMG_VERSION 0xA5 #define SEC_CMD_SELFTEST 0xAE #define SEC_CMD_LP_SELFTEST 0xBE #define SEC_READ_SELFTEST_RESULT 0x80 #define SEC_CMD_SELFTEST_CHOICE 0x5F #define SEC_CMD_SELFTEST_READ 0xAD #define SEC_CMD_STATEMANAGE_ON 0x8E #define SEC_CMD_CHG_SYSMODE 0xD7 #define SEC_CMD_GRIP_DEADZONE 0xE5 #define SEC_CMD_HOVER_DETECT 0xEE #define SEC_CMD_SET_P2PTEST_MODE 0x83 #define SEC_CMD_P2PTEST 0x82 #define SEC_CMD_INTERRUPT_SWITCH 0x89 #define SEC_CMD_INTERRUPT_LEVEL 0x88 #define SEC_CMD_PALM_SWITCH 0x30 #define SEC_CMD_GRIP_SWITCH 0xAA #define SEC_CMD_SENSETIVE_CTRL 0x3F #define SEC_CMD_STOP_FILTER 0x38 #define SEC_CMD_NVM_SAVE 0x0A #define SEC_CMD_NVM_WRITE 0x0C #define SEC_CMD_NVM_READ 0x0B #define SEC_CMD_CM_OFFSET_WRITE 0x0D #define SEC_CMD_CM_OFFSET_READ_SET 0x0E #define SEC_CMD_CM_OFFSET_READ 0x0F #define SEC_CMD_FLASH_ERASE 0xD8 #define SEC_CMD_FLASH_WRITE 0xD9 #define SEC_CMD_FLASH_PADDING 0xDA #define SEC_CMD_FLASH_READ_ADDR 0xD0 #define SEC_CMD_FLASH_READ_SIZE 0xD1 #define SEC_TS_CMD_FLASH_READ_MEM 0xDC #define SEC_CMD_CS_CONTROL 0x8B #define SEC_CMD_FLASH_SEND_DATA 0xEB #define SEC_CMD_FLASH_READ_DATA 0xEC #define FLASH_CMD_RDSR 0x05 #define FLASH_CMD_WREN 0x06 #define FLASH_CMD_CE 0x60 #define FLASH_CMD_SE 0x20 #define FLASH_CMD_PP 0x02 /*********PART3:Struct Area**********************/ typedef struct { u32 signature; /* signature */ u32 img_ver; /* App img version */ u32 totalsize; /* total size */ u32 param_area; /* parameter area */ u32 flag; /* mode select/bootloader mode */ u32 setting; /* HWB settings */ u32 checksum; /* checksum */ u32 boot_addr; u32 fw_ver; u32 boot_dddr2; u32 flash_addr[3]; u32 chunk_num[3]; } sec_fw_header; typedef struct { u32 signature; u32 addr; u32 size; u32 reserved; } sec_fw_chunk; struct sec_gesture_status { u8 eid:2; u8 gtype:4; u8 stype:2; u8 gestureId; u8 coordLen; u8 data; u8 reserved[4]; } __attribute__ ((packed)); /* 8 byte */ struct sec_event_status { u8 eid:2; u8 stype:4; u8 sf:2; u8 status_id; u8 status_data_1; u8 status_data_2; u8 status_data_3; u8 status_data_4; u8 status_data_5; u8 left_event_5_0:6; u8 reserved_2:2; } __attribute__ ((packed)); /* 8 byte */ struct sec_event_coordinate { u8 eid:2; u8 tid:4; u8 tchsta:2; u8 x_11_4; u8 y_11_4; u8 y_3_0:4; u8 x_3_0:4; u8 major; u8 minor; u8 z:6; u8 ttype_3_2:2; u8 left_event:6; u8 ttype_1_0:2; } __attribute__ ((packed)); typedef enum { TOUCH_SYSTEM_MODE_BOOT = 0, TOUCH_SYSTEM_MODE_CALIBRATION = 1, TOUCH_SYSTEM_MODE_TOUCH = 2, TOUCH_SYSTEM_MODE_SELFTEST = 3, TOUCH_SYSTEM_MODE_FLASH = 4, TOUCH_SYSTEM_MODE_LOWPOWER = 5, TOUCH_SYSTEM_MODE_LISTEN } TOUCH_SYSTEM_MODE; typedef enum { TOUCH_MODE_STATE_IDLE = 0, TOUCH_MODE_STATE_HOVER = 1, TOUCH_MODE_STATE_TOUCH = 2, TOUCH_MODE_STATE_NOISY = 3, TOUCH_MODE_STATE_CAL = 4, TOUCH_MODE_STATE_CAL2 = 5, TOUCH_MODE_STATE_WAKEUP = 10 } TOUCH_MODE_STATE; enum { TYPE_RAW_DATA = 0, /* Total - Offset : delta data */ TYPE_SIGNAL_DATA = 1, /* Signal - Filtering & Normalization */ TYPE_AMBIENT_BASELINE = 2, /* Cap Baseline */ TYPE_AMBIENT_DATA = 3, /* Cap Ambient */ TYPE_REMV_BASELINE_DATA = 4, TYPE_DECODED_DATA = 5, /* Raw */ TYPE_REMV_AMB_DATA = 6, /* TYPE_RAW_DATA - TYPE_AMBIENT_DATA */ TYPE_OFFSET_DATA_SEC = 19, /* Cap Offset in SEC Manufacturing Line */ TYPE_OFFSET_DATA_SDC = 29, /* Cap Offset in SDC Manufacturing Line */ TYPE_NOI_P2P_MIN = 30, /* Peak-to-peak noise Min */ TYPE_NOI_P2P_MAX = 31, /* Peak-to-peak noise Max */ TYPE_DATA_DELTA = 60, /* delta */ TYPE_DATA_RAWDATA = 61, /* rawdata */ TYPE_INVALID_DATA = 0xFF, /* Invalid data type for release factory mode */ }; typedef enum { TOUCH_SELFTEST_ITEM_SENSOR_UNI = 0, TOUCH_SELFTEST_ITEM_RAW_VAR_X = 1, TOUCH_SELFTEST_ITEM_RAW_VAR_Y = 2, TOUCH_SELFTEST_ITEM_P2P_MIN = 3, TOUCH_SELFTEST_ITEM_P2P_MAX = 4, TOUCH_SELFTEST_ITEM_OPEN = 5, TOUCH_SELFTEST_ITEM_SHORT = 6, TOUCH_SELFTEST_ITEM_HIGH_Z = 7, TOUCH_SELFTEST_ITEM_OFFSET = 8, TOUCH_SELFTEST_ITEM_RAWDATA = 9, TOUCH_SELFTEST_ITEM_LP_RAWDATA = 10, TOUCH_SELFTEST_ITEM_LP_P2P_MIN = 11, TOUCH_SELFTEST_ITEM_LP_P2P_MAX = 12 } TOUCH_SELFTEST_ITEM; struct chip_data_s6d7at0 { tp_dev tp_type; struct i2c_client *client; u8 boot_ver[3]; bool is_power_down; bool sec_fw_watchdog_surport; struct hw_resource *hw_res; uint32_t flash_page_size; u8 first_event[SEC_EVENT_BUFF_SIZE]; int32_t irq_low_cnt; int32_t esd_stay_cnt; uint8_t touch_direction; bool edge_limit_support; bool fw_edge_limit_support; }; #endif