#include "khaje-pm7250b.dtsi"
#include "khaje-thermal-pm7250b-overlay.dtsi"
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>

&soc {
	mtp_batterydata: qcom,battery-data {
		qcom,batt-id-range-pct = <15>;
		#include "qg-batterydata-alium-3600mah.dtsi"
	};
};

&pm7250b_gpios {
	pm7250b_smb_int_default: pm7250b_smb_int_default {
		pins = "gpio6";
		function = "gpio";
		input-enable;
		bias-pull-up;
		qcom,pull-up-strength = <PMIC_GPIO_PULL_UP_30>;
		power-source = <0>;
	 };
};

&qupv3_se1_i2c {
	status = "ok";
	#include "smb1355.dtsi"
};

&smb1355 {
	pinctrl-names = "default";
	pinctrl-0 = <&pm7250b_smb_int_default>;
	status = "ok";
};

&smb1355_charger {
	qcom,parallel-mode = <1>;
	qcom,hw-die-temp-mitigation;
	status = "ok";
};

&pm7250b_charger {
	status = "ok";
	io-channels = <&pm7250b_vadc ADC_USB_IN_V_16>,
		      <&pm7250b_vadc ADC_USB_IN_I>,
		      <&pm7250b_vadc ADC_CHG_TEMP>,
		      <&pm7250b_vadc ADC_DIE_TEMP>,
		      <&pm7250b_vadc ADC_AMUX_THM3_PU2>,
		      <&pm7250b_vadc ADC_SBUx>,
		      <&pm7250b_vadc ADC_VPH_PWR>,
		      <&pm7250b_vadc ADC_AMUX_THM1_PU2>;
	io-channel-names = "usb_in_voltage",
			   "usb_in_current",
			   "chg_temp",
			   "die_temp",
			   "conn_temp",
			   "sbux_res",
			   "vph_voltage",
			   "skin_temp";
	qcom,battery-data = <&mtp_batterydata>;
	qcom,sec-charger-config = <2>;
	qcom,auto-recharge-soc = <98>;
	qcom,step-charging-enable;
	qcom,sw-jeita-enable;
	qcom,charger-temp-max = <800>;
	qcom,smb-temp-max = <800>;
	qcom,suspend-input-on-debug-batt;
	qcom,fcc-stepping-enable;
	qcom,fcc-step-delay-ms = <100>;
	qcom,fcc-step-size-ua = <100000>;
	qcom,smb-internal-pull-kohm = <0>;
	qcom,en-skin-therm-mitigation;
	qcom,hvdcp3-standalone-config;
};

&pm7250b_qg {
	status = "ok";
	io-channels = <&pm7250b_vadc ADC_BAT_THERM_PU2>,
		      <&pm7250b_vadc ADC_BAT_ID_PU2>;
	io-channel-names = "batt-therm",
			   "batt-id";
	qcom,battery-data = <&mtp_batterydata>;
	qcom,qg-iterm-ma = <100>;
	qcom,hold-soc-while-full;
	qcom,linearize-soc;
	qcom,cl-feedback-on;
	qcom,tcss-enable;
	qcom,fvss-enable;
	qcom,fvss-vbatt-mv = <3500>;
	qcom,bass-enable;
	qcom,vbatt-cutoff-mv = <3400>;
	qcom,vbatt-low-mv = <3500>;
	qcom,vbatt-low-cold-mv = <3800>;
	qcom,vbatt-empty-mv = <3200>;
	qcom,vbatt-empty-cold-mv = <3100>;
};

&sde_dsi {
	pinctrl-0 = <&sde_dsi_active &sde_te_active &disp_lcd_bias_en_default>;
};

&dsi_td4330_truly_v2_video {
	qcom,platform-en-gpio = <&pm7250b_gpios 5 0>;
	qcom,platform-bklight-en-gpio = <&pm7250b_gpios 1 0>;
};

&dsi_td4330_truly_v2_cmd {
	qcom,platform-en-gpio = <&pm7250b_gpios 5 0>;
	qcom,platform-bklight-en-gpio = <&pm7250b_gpios 1 0>;
};

&dsi_nt36672e_fhd_plus_90hz_video {
	qcom,platform-en-gpio = <&pm7250b_gpios 5 0>;
	qcom,platform-bklight-en-gpio = <&pm7250b_gpios 1 0>;
};

&dsi_nt36672e_fhd_plus_120hz_video {
	qcom,platform-en-gpio = <&pm7250b_gpios 5 0>;
	qcom,platform-bklight-en-gpio = <&pm7250b_gpios 1 0>;
};

&cam_res_mgr_label {
	gpios = <&pm7250b_gpios 4 0>;
};

&led_flash_rear {
	gpios = <&pm7250b_gpios 4 0>;
};

&led_flash_rear_aux {
	gpios = <&pm7250b_gpios 4 0>;
};

&led_flash_rear_aux2 {
	gpios = <&pm7250b_gpios 4 0>;
};

&pm7250b_charger {
	dpdm-supply = <&usb2_phy0>;

	smb5_vbus: qcom,smb5-vbus {
		regulator-name = "smb5-vbus";
	};

	smb5_vconn: qcom,smb5-vconn {
		regulator-name = "smb5-vconn";
	};
};

&pm7250b_pdphy {
	vdd-pdphy-supply = <&L15A>;
	vbus-supply = <&smb5_vbus>;
	vconn-supply = <&smb5_vconn>;
};

&usb0 {
	extcon = <&pm7250b_pdphy>, <&pm7250b_charger>, <&eud>;
};