/* SPDX-License-Identifier: GPL-2.0-only */ /* Copyright (c) 2013-2020, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * */ #ifndef UFS_QCOM_PHY_QMP_V3_H_ #define UFS_QCOM_PHY_QMP_V3_H_ #include "phy-qcom-ufs-i.h" /* QCOM UFS PHY control registers */ #define COM_BASE 0x000 #define COM_SIZE 0x18C #define PHY_BASE 0xC00 #define PHY_SIZE 0x1DC #define TX_BASE(n) (0x400 + (0x400 * n)) #define TX_SIZE 0x128 #define RX_BASE(n) (0x600 + (0x400 * n)) #define RX_SIZE 0x1FC #define COM_OFF(x) (COM_BASE + x) #define PHY_OFF(x) (PHY_BASE + x) #define TX_OFF(n, x) (TX_BASE(n) + x) #define RX_OFF(n, x) (RX_BASE(n) + x) /* UFS PHY QSERDES COM registers */ #define QSERDES_COM_ATB_SEL1 COM_OFF(0x00) #define QSERDES_COM_ATB_SEL2 COM_OFF(0x04) #define QSERDES_COM_FREQ_UPDATE COM_OFF(0x08) #define QSERDES_COM_BG_TIMER COM_OFF(0x0C) #define QSERDES_COM_SSC_EN_CENTER COM_OFF(0x10) #define QSERDES_COM_SSC_ADJ_PER1 COM_OFF(0x14) #define QSERDES_COM_SSC_ADJ_PER2 COM_OFF(0x18) #define QSERDES_COM_SSC_PER1 COM_OFF(0x1C) #define QSERDES_COM_SSC_PER2 COM_OFF(0x20) #define QSERDES_COM_SSC_STEP_SIZE1 COM_OFF(0x24) #define QSERDES_COM_SSC_STEP_SIZE2 COM_OFF(0x28) #define QSERDES_COM_POST_DIV COM_OFF(0x2C) #define QSERDES_COM_POST_DIV_MUX COM_OFF(0x30) #define QSERDES_COM_BIAS_EN_CLKBUFLR_EN COM_OFF(0x34) #define QSERDES_COM_CLK_ENABLE1 COM_OFF(0x38) #define QSERDES_COM_SYS_CLK_CTRL COM_OFF(0x3C) #define QSERDES_COM_SYSCLK_BUF_ENABLE COM_OFF(0x40) #define QSERDES_COM_PLL_EN COM_OFF(0x44) #define QSERDES_COM_PLL_IVCO COM_OFF(0x48) /* UFS PHY registers */ #define UFS_PHY_PHY_START PHY_OFF(0x00) #define UFS_PHY_POWER_DOWN_CONTROL PHY_OFF(0x04) #define UFS_PHY_TIMER_20US_CORECLK_STEPS_MSB PHY_OFF(0x08) #define UFS_PHY_TIMER_20US_CORECLK_STEPS_LSB PHY_OFF(0x0C) #define UFS_PHY_TX_LARGE_AMP_DRV_LVL PHY_OFF(0x2C) #define UFS_PHY_TX_LARGE_AMP_POST_EMP_LVL PHY_OFF(0x30) #define UFS_PHY_TX_SMALL_AMP_DRV_LVL PHY_OFF(0x34) #define UFS_PHY_TX_SMALL_AMP_POST_EMP_LVL PHY_OFF(0x38) #define UFS_PHY_LINECFG_DISABLE PHY_OFF(0x130) #define UFS_PHY_RX_SYM_RESYNC_CTRL PHY_OFF(0x134) #define UFS_PHY_RX_MIN_HIBERN8_TIME PHY_OFF(0x138) #define UFS_PHY_RX_SIGDET_CTRL1 PHY_OFF(0x13C) #define UFS_PHY_RX_SIGDET_CTRL2 PHY_OFF(0x140) #define UFS_PHY_RX_PWM_GEAR_BAND PHY_OFF(0x14C) #define UFS_PHY_PCS_READY_STATUS PHY_OFF(0x160) #define UFS_PHY_TX_MID_TERM_CTRL1 PHY_OFF(0x1BC) #define UFS_PHY_MULTI_LANE_CTRL1 PHY_OFF(0x1C4) #define QSERDES_COM_CMN_IETRIM COM_OFF(0x4C) #define QSERDES_COM_CMN_IPTRIM COM_OFF(0x50) #define QSERDES_COM_EP_CLOCK_DETECT_CTR COM_OFF(0x54) #define QSERDES_COM_SYSCLK_DET_COMP_STATUS COM_OFF(0x58) #define QSERDES_COM_CLK_EP_DIV COM_OFF(0x5C) #define QSERDES_COM_CP_CTRL_MODE0 COM_OFF(0x60) #define QSERDES_COM_CP_CTRL_MODE1 COM_OFF(0x64) #define QSERDES_COM_PLL_RCTRL_MODE0 COM_OFF(0x68) #define QSERDES_COM_PLL_RCTRL_MODE1 COM_OFF(0x6C) #define QSERDES_COM_PLL_CCTRL_MODE0 COM_OFF(0x70) #define QSERDES_COM_PLL_CCTRL_MODE1 COM_OFF(0x74) #define QSERDES_COM_PLL_CNTRL COM_OFF(0x78) #define SERDES_COM_BIAS_EN_CTRL_BY_PSM COM_OFF(0x7C) #define QSERDES_COM_SYSCLK_EN_SEL COM_OFF(0x80) #define QSERDES_COM_CML_SYSCLK_SEL COM_OFF(0x84) #define QSERDES_COM_RESETSM_CNTRL COM_OFF(0x88) #define QSERDES_COM_RESETSM_CNTRL2 COM_OFF(0x8C) #define QSERDES_COM_LOCK_CMP_EN COM_OFF(0x90) #define QSERDES_COM_LOCK_CMP_CFG COM_OFF(0x94) #define QSERDES_COM_LOCK_CMP1_MODE0 COM_OFF(0x98) #define QSERDES_COM_LOCK_CMP2_MODE0 COM_OFF(0x9C) #define QSERDES_COM_LOCK_CMP3_MODE0 COM_OFF(0xA0) #define QSERDES_COM_LOCK_CMP1_MODE1 COM_OFF(0xA4) #define QSERDES_COM_LOCK_CMP2_MODE1 COM_OFF(0xA8) #define QSERDES_COM_LOCK_CMP3_MODE1 COM_OFF(0xAC) #define QSERDES_COM_DEC_START_MODE0 COM_OFF(0xB0) #define QSERDES_COM_DEC_START_MODE1 COM_OFF(0xB4) #define QSERDES_COM_DIV_FRAC_START1_MODE0 COM_OFF(0xB8) #define QSERDES_COM_DIV_FRAC_START2_MODE0 COM_OFF(0xBC) #define QSERDES_COM_DIV_FRAC_START3_MODE0 COM_OFF(0xC0) #define QSERDES_COM_DIV_FRAC_START1_MODE1 COM_OFF(0xC4) #define QSERDES_COM_DIV_FRAC_START2_MODE1 COM_OFF(0xC8) #define QSERDES_COM_DIV_FRAC_START3_MODE1 COM_OFF(0xCC) #define QSERDES_COM_INTEGLOOP_INITVAL COM_OFF(0xD0) #define QSERDES_COM_INTEGLOOP_EN COM_OFF(0xD4) #define QSERDES_COM_INTEGLOOP_GAIN0_MODE0 COM_OFF(0xD8) #define QSERDES_COM_INTEGLOOP_GAIN1_MODE0 COM_OFF(0xDC) #define QSERDES_COM_INTEGLOOP_GAIN0_MODE1 COM_OFF(0xE0) #define QSERDES_COM_INTEGLOOP_GAIN1_MODE1 COM_OFF(0xE4) #define QSERDES_COM_VCOCAL_DEADMAN_CTRL COM_OFF(0xE8) #define QSERDES_COM_VCO_TUNE_CTRL COM_OFF(0xEC) #define QSERDES_COM_VCO_TUNE_MAP COM_OFF(0xF0) #define QSERDES_COM_VCO_TUNE1_MODE0 COM_OFF(0xF4) #define QSERDES_COM_VCO_TUNE2_MODE0 COM_OFF(0xF8) #define QSERDES_COM_VCO_TUNE1_MODE1 COM_OFF(0xFC) #define QSERDES_COM_VCO_TUNE2_MODE1 COM_OFF(0x100) #define QSERDES_COM_VCO_TUNE_INITVAL1 COM_OFF(0x104) #define QSERDES_COM_VCO_TUNE_INITVAL2 COM_OFF(0x108) #define QSERDES_COM_VCO_TUNE_MINVAL1 COM_OFF(0x10C) #define QSERDES_COM_VCO_TUNE_MINVAL2 COM_OFF(0x110) #define QSERDES_COM_VCO_TUNE_MAXVAL1 COM_OFF(0x114) #define QSERDES_COM_VCO_TUNE_MAXVAL2 COM_OFF(0x118) #define QSERDES_COM_VCO_TUNE_TIMER1 COM_OFF(0x11C) #define QSERDES_COM_VCO_TUNE_TIMER2 COM_OFF(0x120) #define QSERDES_COM_CMN_STATUS COM_OFF(0x124) #define QSERDES_COM_RESET_SM_STATUS COM_OFF(0x128) #define QSERDES_COM_RESTRIM_CODE_STATUS COM_OFF(0x12C) #define QSERDES_COM_PLLCAL_CODE1_STATUS COM_OFF(0x130) #define QSERDES_COM_PLLCAL_CODE2_STATUS COM_OFF(0x134) #define QSERDES_COM_CLK_SELECT COM_OFF(0x138) #define QSERDES_COM_HSCLK_SEL COM_OFF(0x13C) #define QSERDES_COM_INTEGLOOP_BINCODE_STATUS COM_OFF(0x140) #define QSERDES_COM_PLL_ANALOG COM_OFF(0x144) #define QSERDES_COM_CORECLK_DIV_MODE0 COM_OFF(0x148) #define QSERDES_COM_CORECLK_DIV_MODE1 COM_OFF(0x14C) #define QSERDES_COM_SW_RESET COM_OFF(0x150) #define QSERDES_COM_CORE_CLK_EN COM_OFF(0x154) #define QSERDES_COM_C_READY_STATUS COM_OFF(0x158) #define QSERDES_COM_CMN_CONFIG COM_OFF(0x15C) #define QSERDES_COM_CMN_RATE_OVERRIDE COM_OFF(0x160) #define QSERDES_COM_SVS_MODE_CLK_SEL COM_OFF(0x164) #define QSERDES_COM_DEBUG_BUS0 COM_OFF(0x168) #define QSERDES_COM_DEBUG_BUS1 COM_OFF(0x16C) #define QSERDES_COM_DEBUG_BUS2 COM_OFF(0x170) #define QSERDES_COM_DEBUG_BUS3 COM_OFF(0x174) #define QSERDES_COM_DEBUG_BUS_SEL COM_OFF(0x178) #define QSERDES_COM_CMN_MISC1 COM_OFF(0x17C) #define QSERDES_COM_CMN_MISC2 COM_OFF(0x180) #define QSERDES_COM_CMN_MODE COM_OFF(0x184) #define QSERDES_COM_CMN_VREG_SEL COM_OFF(0x188) /* UFS PHY TX registers */ #define QSERDES_TX0_RES_CODE_LANE_OFFSET_TX TX_OFF(0, 0x44) #define QSERDES_TX0_RES_CODE_LANE_OFFSET_RX TX_OFF(0, 0x48) #define QSERDES_TX0_TRANSCEIVER_BIAS_EN TX_OFF(0, 0x5C) #define QSERDES_TX0_LANE_MODE_1 TX_OFF(0, 0x8C) #define QSERDES_TX0_LANE_MODE_2 TX_OFF(0, 0x90) #define QSERDES_TX0_LANE_MODE_3 TX_OFF(0, 0x94) #define QSERDES_TX1_RES_CODE_LANE_OFFSET_TX TX_OFF(1, 0x44) #define QSERDES_TX1_RES_CODE_LANE_OFFSET_RX TX_OFF(1, 0x48) #define QSERDES_TX1_LANE_MODE_1 TX_OFF(1, 0x8C) /* UFS PHY RX registers */ #define QSERDES_RX0_UCDR_SVS_SO_GAIN_HALF RX_OFF(0, 0x24) #define QSERDES_RX0_UCDR_SVS_SO_GAIN_QUARTER RX_OFF(0, 0x28) #define QSERDES_RX0_UCDR_SVS_SO_GAIN RX_OFF(0, 0x2C) #define QSERDES_RX0_UCDR_FASTLOCK_FO_GAIN RX_OFF(0, 0x30) #define QSERDES_RX0_UCDR_SO_SATURATION_AND_ENABLE RX_OFF(0, 0x34) #define QSERDES_RX0_UCDR_FASTLOCK_COUNT_LOW RX_OFF(0, 0x3C) #define QSERDES_RX0_UCDR_PI_CONTROLS RX_OFF(0, 0x44) #define QSERDES_RX0_RX_TERM_BW RX_OFF(0, 0x7C) #define QSERDES_RX0_RX_EQ_GAIN2_LSB RX_OFF(0, 0xC8) #define QSERDES_RX0_RX_EQ_GAIN2_MSB RX_OFF(0, 0xCC) #define QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL1 RX_OFF(0, 0xD0) #define QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL2 RX_OFF(0, 0xD4) #define QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL3 RX_OFF(0, 0xD8) #define QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL4 RX_OFF(0, 0xDC) #define QSERDES_RX0_SIGDET_CNTRL RX_OFF(0, 0x104) #define QSERDES_RX0_SIGDET_LVL RX_OFF(0, 0x108) #define QSERDES_RX0_SIGDET_DEGLITCH_CNTRL RX_OFF(0, 0x10C) #define QSERDES_RX0_RX_INTERFACE_MODE RX_OFF(0, 0x11C) #define QSERDES_RX0_RX_MODE_00 RX_OFF(0, 0x164) #define QSERDES_RX0_UCDR_FO_GAIN RX_OFF(0, 0x08) #define QSERDES_RX1_UCDR_SVS_SO_GAIN_HALF RX_OFF(1, 0x24) #define QSERDES_RX1_UCDR_SVS_SO_GAIN_QUARTER RX_OFF(1, 0x28) #define QSERDES_RX1_UCDR_SVS_SO_GAIN RX_OFF(1, 0x2C) #define QSERDES_RX1_UCDR_FASTLOCK_FO_GAIN RX_OFF(1, 0x30) #define QSERDES_RX1_UCDR_SO_SATURATION_AND_ENABLE RX_OFF(1, 0x34) #define QSERDES_RX1_UCDR_FASTLOCK_COUNT_LOW RX_OFF(1, 0x3C) #define QSERDES_RX1_UCDR_PI_CONTROLS RX_OFF(1, 0x44) #define QSERDES_RX1_RX_TERM_BW RX_OFF(1, 0x7C) #define QSERDES_RX1_RX_EQU_ADAPTOR_CNTRL2 RX_OFF(1, 0xD4) #define QSERDES_RX1_RX_EQU_ADAPTOR_CNTRL3 RX_OFF(1, 0xD8) #define QSERDES_RX1_RX_EQU_ADAPTOR_CNTRL4 RX_OFF(1, 0xDC) #define QSERDES_RX1_SIGDET_CNTRL RX_OFF(1, 0x104) #define QSERDES_RX1_SIGDET_LVL RX_OFF(1, 0x108) #define QSERDES_RX1_SIGDET_DEGLITCH_CNTRL RX_OFF(1, 0x10C) #define QSERDES_RX1_RX_INTERFACE_MODE RX_OFF(1, 0x11C) #define QSERDES_RX1_RX_MODE_00 RX_OFF(1, 0x164) #define QSERDES_RX1_UCDR_FO_GAIN RX_OFF(1, 0x8) #define UFS_PHY_RX_LINECFG_DISABLE_BIT BIT(1) /* * This structure represents the v3 specific phy. * common_cfg MUST remain the first field in this structure * in case extra fields are added. This way, when calling * get_ufs_qcom_phy() of generic phy, we can extract the * common phy structure (struct ufs_qcom_phy) out of it * regardless of the relevant specific phy. */ struct ufs_qcom_phy_qmp_v3 { struct ufs_qcom_phy common_cfg; }; static struct ufs_qcom_phy_calibration phy_cal_table_rate_A[] = { UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_POWER_DOWN_CONTROL, 0x01), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CMN_CONFIG, 0x06), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYSCLK_EN_SEL, 0xD5), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL, 0x20), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CLK_SELECT, 0x30), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYS_CLK_CTRL, 0x02), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x04), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BG_TIMER, 0x0A), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_HSCLK_SEL, 0x00), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP_EN, 0x01), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_CTRL, 0x00), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORE_CLK_EN, 0x00), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_MAP, 0x04), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SVS_MODE_CLK_SEL, 0x05), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IVCO, 0x07), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_INITVAL1, 0xFF), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_INITVAL2, 0x00), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START_MODE0, 0x82), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CP_CTRL_MODE0, 0x06), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RCTRL_MODE0, 0x16), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CCTRL_MODE0, 0x36), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x3F), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE1_MODE0, 0xDA), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE2_MODE0, 0x01), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP1_MODE0, 0xFF), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP2_MODE0, 0x0C), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START_MODE1, 0x98), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CP_CTRL_MODE1, 0x06), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RCTRL_MODE1, 0x16), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CCTRL_MODE1, 0x36), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN0_MODE1, 0x3F), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN1_MODE1, 0x00), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE1_MODE1, 0xC1), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE2_MODE1, 0x00), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP1_MODE1, 0x32), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP2_MODE1, 0x0F), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX0_LANE_MODE_1, 0x06), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_SIGDET_LVL, 0x24), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_SIGDET_CNTRL, 0x0F), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_SIGDET_DEGLITCH_CNTRL, 0x1E), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_INTERFACE_MODE, 0x40), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_UCDR_FASTLOCK_FO_GAIN, 0x0B), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_TERM_BW, 0x5B), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL2, 0x06), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL3, 0x04), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL4, 0x1B), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_UCDR_SVS_SO_GAIN_HALF, 0x04), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_UCDR_SVS_SO_GAIN_QUARTER, 0x04), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_UCDR_SVS_SO_GAIN, 0x04), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_UCDR_SO_SATURATION_AND_ENABLE, 0x5B), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_UCDR_PI_CONTROLS, 0x81), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_UCDR_FASTLOCK_COUNT_LOW, 0x80), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX0_RES_CODE_LANE_OFFSET_TX, 0x04), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX0_RES_CODE_LANE_OFFSET_RX, 0x07), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_00, 0x59), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_UCDR_FO_GAIN, 0x0C), UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_SIGDET_CTRL2, 0x6F), UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_LARGE_AMP_DRV_LVL, 0x0F), UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_SMALL_AMP_DRV_LVL, 0x02), UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_SYM_RESYNC_CTRL, 0x03), UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_MID_TERM_CTRL1, 0x43), UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_LARGE_AMP_POST_EMP_LVL, 0x12), UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_SMALL_AMP_POST_EMP_LVL, 0x0F), UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_SIGDET_CTRL1, 0x0F), UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_MIN_HIBERN8_TIME, 0xFF),/* 13 us */ }; static struct ufs_qcom_phy_calibration phy_cal_table_2nd_lane[] = { UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX1_LANE_MODE_1, 0x06), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_SIGDET_LVL, 0x24), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_SIGDET_CNTRL, 0x0F), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_SIGDET_DEGLITCH_CNTRL, 0x1E), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_INTERFACE_MODE, 0x40), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_UCDR_FASTLOCK_FO_GAIN, 0x0B), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_TERM_BW, 0x5B), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_EQU_ADAPTOR_CNTRL2, 0x06), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_EQU_ADAPTOR_CNTRL3, 0x04), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_EQU_ADAPTOR_CNTRL4, 0x1B), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_UCDR_SVS_SO_GAIN_HALF, 0x04), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_UCDR_SVS_SO_GAIN_QUARTER, 0x04), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_UCDR_SVS_SO_GAIN, 0x04), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_UCDR_SO_SATURATION_AND_ENABLE, 0x5B), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_UCDR_PI_CONTROLS, 0x81), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_UCDR_FASTLOCK_COUNT_LOW, 0x80), UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_MULTI_LANE_CTRL1, 0x02), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX1_RES_CODE_LANE_OFFSET_TX, 0x04), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX1_RES_CODE_LANE_OFFSET_RX, 0x07), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_00, 0x59), UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_UCDR_FO_GAIN, 0x0C), }; static struct ufs_qcom_phy_calibration phy_cal_table_rate_B[] = { UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_MAP, 0x44), }; #endif